Setting throttle pots!
Discussion
If you click on the help tab at the top of the page I,m sure it gives you the figures you should have.
As far as I know the throttle pots should be 19% at a tickover of 950rpm, with lambda consantly varying between 0 to 1.5volts, adaptives as close to 0 as posible but not over 20 and timing at around 17 degrees.
When you accelerate using the side with the cable on (passengers side) both throttle readings should go up together, if not, there is play, or miss adjustment on the cross shaft, linking the two banks.
Play with the adjustments to get it right, this is the part I enjoy, because most modern cars you can't fix/adjust anything they just do what they do-boringlly!
As far as I know the throttle pots should be 19% at a tickover of 950rpm, with lambda consantly varying between 0 to 1.5volts, adaptives as close to 0 as posible but not over 20 and timing at around 17 degrees.
When you accelerate using the side with the cable on (passengers side) both throttle readings should go up together, if not, there is play, or miss adjustment on the cross shaft, linking the two banks.
Play with the adjustments to get it right, this is the part I enjoy, because most modern cars you can't fix/adjust anything they just do what they do-boringlly!
Gassing Station | Cerbera | Top of Page | What's New | My Stuff