ECU Advice

[CLLEE]

My first post ,hello all

I'm in need of some guidance and or recommendations on aftermarket ECUs .I have recently rebuilt my Renault Alpine GTA lump and it is holding together so I thought I might try to break it again .
It's a 2.5l Turbo with a prehistoric Renix system and weird flywheel pattern (apparently).
I have most of the info on the existing set-up but am struggling to decide which way to go .It won't need that complex a unit I suspect and I'm not looking for massive increase in output .
Any advice who/where/how ??
Thanks

[topsparks]

Speak to Dave Walker at Emeralld,he did my TVR installation and has a friend who can make up a loom for you,the best bit is he only charges £250+ vat for mapping your car on his RR.My car was almost undrivable but with his ECU it will pull from tickover in 5th gear with no shunting.

[AlpineAndy]

have a look at : http://www.pistonheads.com/gassing/topic.asp?h=0&a...
and
http://www.pistonheads.com/gassing/topic.asp?h=0&a...

Edited by AlpineAndy on Wednesday 6th June 14:12