Ride Height
Author
Discussion

Gooby

Original Poster:

9,269 posts

265 months

Wednesday 6th June 2007
quotequote all
I think the standard elise ride height is a little high and now I have some aftermarket suspension (dropped by 15mm), is there an optimum height for the suspension?

I have no problem with speed bumps etc, mainly because I have taken off the front number plate.

Esprit

6,373 posts

314 months

Wednesday 6th June 2007
quotequote all
for on-track handling 100/110 - 110/120 seems to be the consensus.

For road use anything below 120 s seen as pushing the boundaries as you'll start to lose travel and you'll find clearance becomes more of an issue.

tuscan_thunder

1,763 posts

277 months

Wednesday 6th June 2007
quotequote all
what suspension have you bought Gooby?

110/120 is usually about right but with a stiffer set-up you might be able to drop it further.

emenel

891 posts

250 months

Wednesday 6th June 2007
quotequote all
Gooby said:
I think the standard elise ride height is a little high and now I have some aftermarket suspension (dropped by 15mm), is there an optimum height for the suspension?

I have no problem with speed bumps etc, mainly because I have taken off the front number plate.
TTIWWP, or whatever the correct acronym is.

I agree that the standard height leaves a pretty ugly gap between wheel and arch and will hopefully be getting this resolved soon.

Does anyone know what the standard height is on an Exige S and, as per Gooby, is there a preferred height for mainly road use?

Paul RN

1,168 posts

245 months

Wednesday 6th June 2007
quotequote all
Standard height is 100/110 for the 160. Don't seem to have any (major) issues with speed if you take the big ones slow.

Gooby

Original Poster:

9,269 posts

265 months

Wednesday 6th June 2007
quotequote all
tuscan_thunder said:
what suspension have you bought Gooby?

110/120 is usually about right but with a stiffer set-up you might be able to drop it further.
I have speedyellows old 2 way adjustables (Ohlins) from his 240R. Basically 240R suspension. It has been on for a couple of months, I am just thinking about tinkering BUT I know sod all about suspension....

S Works

10,166 posts

281 months

Wednesday 6th June 2007
quotequote all
Leave it at whatever Plans set it up with would be my suggestion Gooby. As I'm sure you know, altering height then alters camber etc. so you'll lose benefit of the settings you already have.

When I was in it last it felt very nicely planted, looked lower and more purposeful (plenty of camber on the rear) than before and seems to handle very well.

Did you talk to them about how they'd set it up for you? Do I remember right that it was corner-weighted too?

Gooby

Original Poster:

9,269 posts

265 months

Wednesday 6th June 2007
quotequote all
S Works said:
Leave it at whatever Plans set it up with would be my suggestion Gooby. As I'm sure you know, altering height then alters camber etc. so you'll lose benefit of the settings you already have.

When I was in it last it felt very nicely planted, looked lower and more purposeful (plenty of camber on the rear) than before and seems to handle very well.

Did you talk to them about how they'd set it up for you? Do I remember right that it was corner-weighted too?
Yep planted and corner weighted - Lovely

As I said I know sod all about suspension so the desire to fiddle with the suspension is held back by me being an idiot...

shangani

3,069 posts

268 months

Wednesday 6th June 2007
quotequote all
Gooby, seriously don't go for silly low ride heights. If the car is handling well and doesn't hit speedbumps then you should leave it alone. Changing the ride height will mean a whole new geo and cornerweight.

FWIW, S1 front clam design allows for lower front ride height than the S2 for equivalent front ground clearance. Try 100mm on the front on an S2 and you will hit most things. I scrape occasionally at 115/120.

Walshy actually increased the ride height on his road car to 120 at the front iirc because he was sick of hitting the front clam.

Gooby

Original Poster:

9,269 posts

265 months

Wednesday 6th June 2007
quotequote all
shangani said:
Gooby, seriously don't go for silly low ride heights. If the car is handling well and doesn't hit speedbumps then you should leave it alone. Changing the ride height will mean a whole new geo and cornerweight.

FWIW, S1 front clam design allows for lower front ride height than the S2 for equivalent front ground clearance. Try 100mm on the front on an S2 and you will hit most things. I scrape occasionally at 115/120.

Walshy actually increased the ride height on his road car to 120 at the front iirc because he was sick of hitting the front clam.
OK - I wont play with the ride height(tut). What else can I play with??

4pot

481 posts

255 months

Wednesday 6th June 2007
quotequote all
[quote=Gooby
OK - I wont play with the ride height(tut). What else can I play with??
[/quote]

You're gonads?rofl

Gooby

Original Poster:

9,269 posts

265 months

Wednesday 6th June 2007
quotequote all
4pot said:
Gooby said:
OK - I wont play with the ride height(tut). What else can I play with??
You're gonads?rofl
um .. are you in the right forum. There are places for people like you biggrin


Edited by Gooby on Wednesday 6th June 16:31

4pot

481 posts

255 months

Wednesday 6th June 2007
quotequote all
Sorry, couldn't resist matebiggrin

m11tey

34 posts

245 months

Wednesday 6th June 2007
quotequote all
FWIW, S1 front clam design allows for lower front ride height than the S2 for equivalent front ground clearance. Try 100mm on the front on an S2 and you will hit most things. I scrape occasionally at 115/120.

Hi Shangani,

What`s a good ride height (for road use) on an S1 then? Is it the same as the S2? or do most people lower further because of the front clam design and can get away with it? I just wonedered as it`s somthing i`m considering.

cheers,

Mark

cej

961 posts

253 months

Wednesday 6th June 2007
quotequote all
My S1 sits at around 100/110 and I don't have that many issues with clearance.

Hollywood Wheels

3,689 posts

261 months

Wednesday 6th June 2007
quotequote all
Goobs, don't know if you saw my 'spotted' here and on Seloc, but I saw you in London last month and the car looks very low indeed. My 160 was 90/100 before the Nitrons went on, and that was stupidly low, but it looked awesome. I wish I couldget the Nitron at that height but Sincs recommended against it, which I can understand.....

Gooby

Original Poster:

9,269 posts

265 months

Wednesday 6th June 2007
quotequote all
Hollywood Wheels said:
Goobs, don't know if you saw my 'spotted' here and on Seloc, but I saw you in London last month and the car looks very low indeed. My 160 was 90/100 before the Nitrons went on, and that was stupidly low, but it looked awesome. I wish I couldget the Nitron at that height but Sincs recommended against it, which I can understand.....
Wow, didnt realise we almost met!

I have been told by the collective genius that is PH and I wont go lower. It is a bit silly to play with a set up that works really well.

There was a silly reason for it, just wanted to get below the 40 inch height!

Hollywood Wheels

3,689 posts

261 months

Wednesday 6th June 2007
quotequote all
Trust me fella, it looks the absolute tits already....

shangani

3,069 posts

268 months

Wednesday 6th June 2007
quotequote all
Gooby said:
OK - I wont play with the ride height(tut). What else can I play with??
Bemani supercharger?