Maser 3200 GT (2000) Throttle Body??
Maser 3200 GT (2000) Throttle Body??
Author
Discussion

paulsmith707

Original Poster:

5 posts

228 months

Thursday 7th June 2007
quotequote all
I would be grateful to any constructive feedback with regards to the current problems I have on the car.

The windows won't respond to the switch and instead lock/unlock the car, which as I'm in Dubai and it's currently in the mid 40's is not much fun?? Being hot, wet and sweaty I believe is best applied to other pursuits!

More problematic is the fact that the throttle seems to have a mind of it's own at the moment. Basically I can start the car sometimes and the acceleration is pretty much all there, sometimes it's limited, and others hardly there at all?? I can sometimes get a result by simply turning the engine off and back on (skill I've learnt from my IT days!!)and find I can then motor along.

I did take it to the Dealership here and after diagnostics they said the entire throttle body needs replacing - well they would wouldn't they?! Didn't have a great explanation on the windows.

If anyone has any comments that could possibly help me remedy this without having to spend half as much again as I bought the car for then I would be eternally grateful. My view would suggest a problem somewhere with the electrics but then I know nothing!

Cheers

Paul

3200gt

2,727 posts

250 months

Thursday 7th June 2007
quotequote all
You can do a reset procedure on the throttle body (potentiometer) to let it relearn the idle and full throttle positions. Unfortunately Im not where the info is at the mo but will post when I get home.
This will reset the actual poteniometer itself, however if it or the conections to it have a fault then it will re-occur. Disconect the potentiometer and clean the connectors then run the reset procedure.
If this fails to solve the problem then it is off to the dealers.

D33p

128 posts

246 months

Thursday 7th June 2007
quotequote all
Hi PS,

Just out of interest do you know how many 3200's are in Dubai and is there a big market for them? What I'm trying to understand is what are current market prices like - similar to UK?

I'm down the road in Abu Dhabi.

Thanks,
D

3200gt

2,727 posts

250 months

Thursday 7th June 2007
quotequote all
1) Reset the mechanical zero position
- Put gear lever in neutral
- Switch on ignition (to MAR position) but do NOT start the engine
- Do not touch the throttle pedal for 2 minutes
- Switch off ignition

2) Reset the mechanical Full Throttle position
- Put gear lever in neutral
- Switch on ignition (to MAR position) but do NOT start the engine
- Fully depress throttle pedal and hold for 5 seconds
- Release throttle pedal completely
- Switch off ignition

thats if were talking about the same component!

paulsmith707

Original Poster:

5 posts

228 months

Sunday 10th June 2007
quotequote all
Thank you very much for the advice. I'll give it a go tonight and see if it does the trick.

On the subject of price I managed to pick up my 3200 GT for approx 10,000 pounds sterling and got it through Gulf News. It had 70,00 km on the clock and full service history. Been a dream car till this throttle and window problem and had a good year of driving before this.

Cheers

Paul

Cardiff

381 posts

248 months

Monday 11th June 2007
quotequote all
did the reset help at all?

paulsmith707

Original Poster:

5 posts

228 months

Tuesday 12th June 2007
quotequote all
Unfortunately the reset didn't work but then I didn't have a clue as to how to make sure the connections to the potentiometer were OK. There is now no acceleration at all and suspect that I'm going to have to indulge in a new throttle body or second hand?

However, on the positive side, it does still look very nice in the driveway!!

Any other suggestions please feel free to send before I have to come up with some ingenious Insurance ploy:-)


3200gt

2,727 posts

250 months

Tuesday 12th June 2007
quotequote all
The potentiometer is located down by the acc pedal. Looks like a black round cylinder with an arm out one end. Just undo the electrical conectors clean both male and female and reconnect. Try the reset again and see what happens.
The new part is (if required) is approx 500-600 quid here in the UK but there is a lot of speculation on here that it is exactly the same as one on an Alfa for about 150 quid.
Before you spend any money though get it put on a computer to check what faults have been stored. This should give a good indication as to which component/s are causing the problems. It'll cost little but could save thousands.

Good luck

paulsmith707

Original Poster:

5 posts

228 months

Thursday 14th June 2007
quotequote all
Thanks once again for bothering to reply and the useful advice. I will see if that has any effect.

I did take it to the dealership here and get it on the computer. They said that the diagnosis meant I had to replace throttle body, potentiometer and gasket. that little lot is going to cost me about 4,000 sterling with labour.

If I can sort it out without this then so much the better. If not, suspect it is going to clock up some driveway miles for a while yet.

Nigelo

293 posts

259 months

Thursday 14th June 2007
quotequote all
Paul

Unless Dealer is including other work, the price quoted is ridiculous. The throttle body to order is £1,446.11 at Eurospares in UK on link Throttle Body and the potentiometer in stock at £375 on link Throttle Potentiometer The work required to change either is insignificant, max 2 hours.

However, before proceeding with the change, check with Dealer exactly what errors reported on their SD2/3 diagnostics and demand a full printout. FYI, there have been many examples in the UK of Dealers swapping out these components in the hope that it cures the problem only to find that their "swap it and see" method did not work.

FWIW, the price quoted and the requirement to change both TB and Pot (which is unusual) makes me a touch suspicious.

Hope this helps

Edited to add TB gasket link at £14.52

Edited by Nigelo on Thursday 14th June 12:14

paulsmith707

Original Poster:

5 posts

228 months

Thursday 14th June 2007
quotequote all
Thanks Nigelo for that feedback - got me thinking even more now. I had the diagnostics done a few weeks ago now so not sure if they will still have a record? Paid for it though but they just thrust a quote into my hand for all the subsequent work.

Problem is I don't trust this lot as far as I could drop kick them but have few alternatives. I did take it initially to someone else I know who runs a garage and they thought some of the problem lay with the circuit boards which had somehow got wet. Now in Manchester I can understand this but in a desert?? Anyway god bless em they did get someone to try and see if they could mend them but couldn't. This perhaps explains problem with windows not going up but would it affect the throttle?

If I have to cough up I have to cough up but, particularly after your comments, how do I know where the problem really lies and if all this quoted work will do the trick? Is there a way you can think of that I can get a second and definitive opinion without shipping the car anywhere.


Nigelo

293 posts

259 months

Friday 15th June 2007
quotequote all
The problem is where you are located. All I can suggest is to go back to the Dealer who carried out the diagnostics and obtain a "printout" of the diagnostic checks particularly the errors.

What you should be aware of is that the diags are done on either an SD2 tester (Maserati specific) or the later SD3 (handles both Ferrari and Maserati). In both cases it is standard practice to "print" all errors stored in your ECU and then clear those errors. Then the car is tested again to see if any errors recur - If so, they are then "printed" and an analysis can be done sometimes involving further specific diag checks.

The important info is contained in those "printouts" - The good news is that these "prints" are actually mini data files created on the SD2/3 tester in a bespoke Digitek format that can be transferred to and read by the accompanying software loaded on the Dealer's PC / Laptop (or more to the point anyone else who has an SD2/3). It contains details of vehicle / date and time and of course the error details / test results. These results are usually stored by the dealer along with your vehicle details for recall when your car arrives for repair.

That's the background. As you have paid for the diag work, demand copies of ALL of these diag files for your car (basis you need to know chapter and verse etc) and contact me through my profile - I will let you know where to email them and hopefully can throw some light on the matter. At the very least, they cannot refuse to let you have hard copies of the results but you do need everything ie original errors found and those that repeated after resetting. Don't let them fob you off with any excuses.

Hope this helps

Edited by Nigelo on Friday 15th June 00:08

wicked1

146 posts

247 months

Friday 15th June 2007
quotequote all
I am concerned but not surprised that a main dealer is just guessing at what is wrong with your car. I do not believe that both components have failed, i suspect the throttle body is faulty. If you have done the basics as listed above and the problem still exists then it does require further investigation but like nigelo has said it needs the read out info to help. I have had numerous clients coming in blaming the potentiometer when a simple reset does actually cure the problem.

good luck