Film transfer.......Camcorder to pc...
Film transfer.......Camcorder to pc...
Author
Discussion

Chilli

Original Poster:

17,320 posts

267 months

Monday 11th June 2007
quotequote all
Can anyone give me an idiots guide to doing this? I've tried a few things, but can't even get the pc to recognise the device.

Cheers.

Vanya

2,058 posts

275 months

Monday 11th June 2007
quotequote all
Bump...

Hope you don't mind C.

I'm interested in any replies.
Tried this quite a while ago, with my Sony camcorder linked with the supplied USB cable to my 'not too old' Toshiba laptop.
Connection seemed okay but the set up chundered away for ages, I mean a few hours as though it was trying to find all the space on the hard drive.
The progress bar got almost to the end and... sploosh, some message about not enough space or something. From memory I think I was only trying to transfer 7.5 mins of vid.

Anyway, back to to Chilli's plea...

Anyone for an idiot's guide... please?!

hugoagogo

23,438 posts

264 months

Monday 11th June 2007
quotequote all
i had this prob
http://www.pistonheads.com/gassing/topic.asp?h=0&a...

firewire is better/faster than USB, shirley?

Vanya

2,058 posts

275 months

Monday 11th June 2007
quotequote all
Huge thanks Hugo, that looks spot on!

A trip for me to Mall of the Emirates then Fri/Sat.

bounce

must.get.wireless.home.network.set.up.lazy.bastid.

biggrin

ThePassenger

6,962 posts

266 months

Monday 11th June 2007
quotequote all
Idiots guide: Drive space. You think you've got enough, you're wrong. Seriously, uncompressed video sucks space up at anything up to 1GB per min depending on the resolution. Ohh and the drive has to be fast, 7200rpm or better and all of that space has to be in one single large block, so defrag before you even bother beginning.

If you're cam-corder is new it might have a Firewire port on it, some do, some don't. If yours does and the PC does, plug one in to tother. If the PC is lacking, pick up a Firewire PCI card from somewhere, fit it, and presto. You're chosen software will probably be able to just rip the video right off the camera now.

If the cam-corder doesn't, then you're looking at the old fashioned way. Get a capture card, PCI again, something from Hauppage is a good place to start. Install it. Connect cam-corder to TV card.
Bingo. You can use the TV cards software to record the video on to the PC and then edit it in your chosen software.

Software... your looking at something from Pinnacle IMHO, unless you really want to splash the cash and get Adobe's offerings.

Chilli

Original Poster:

17,320 posts

267 months

Monday 11th June 2007
quotequote all
And that's an idiot's guide? Feck it....I'll get a mate to do it!!

Cheers.

Jinx

12,023 posts

291 months

Monday 11th June 2007
quotequote all
Chilli said:
And that's an idiot's guide? Feck it....I'll get a mate to do it!!

Cheers.
Get a firewire card. USB only detects basic functionality (pull off the files etc. ) Use Firewire and XP should detect the full functionality of the camcorder - I was shocked by the difference when I did this with my brother's camcorder.

dern

14,055 posts

310 months

Monday 11th June 2007
quotequote all
If you're trying to connect a camera using firewire remember that window xp by default sees the firewire port as a network connection and won't recognise a camera plugged in to it. To disable this go the control panel and choose network connections. Listed will be an entry called something like "1394 connection"... right-click on it and select disable. Then reboot the pc (no idea why this is needed but it was on mine). Then when you're back in windows plug the camera in to the and the pc should recognise it. From there start the windows movie maker application by selecting the start/all programs menu. Select the camera as the source and import your films. Then you can monkey about with editing, adding title and so on.

Vanya

2,058 posts

275 months

Tuesday 12th June 2007
quotequote all
dern said:
If you're trying to connect a camera using firewire remember that window xp by default sees the firewire port as a network connection and won't recognise a camera plugged in to it. To disable this go the control panel and choose network connections. Listed will be an entry called something like "1394 connection"... right-click on it and select disable. Then reboot the pc (no idea why this is needed but it was on mine). Then when you're back in windows plug the camera in to the and the pc should recognise it. From there start the windows movie maker application by selecting the start/all programs menu. Select the camera as the source and import your films. Then you can monkey about with editing, adding title and so on.
That sounds like a top tip, thanks Dern.

Thanks guys.

Chilli, did you check the link Hugo put up?
Sounds fairly straightforward on that thread.

Chilli

Original Poster:

17,320 posts

267 months

Tuesday 12th June 2007
quotequote all
Vanya said:
dern said:
If you're trying to connect a camera using firewire remember that window xp by default sees the firewire port as a network connection and won't recognise a camera plugged in to it. To disable this go the control panel and choose network connections. Listed will be an entry called something like "1394 connection"... right-click on it and select disable. Then reboot the pc (no idea why this is needed but it was on mine). Then when you're back in windows plug the camera in to the and the pc should recognise it. From there start the windows movie maker application by selecting the start/all programs menu. Select the camera as the source and import your films. Then you can monkey about with editing, adding title and so on.
That sounds like a top tip, thanks Dern.

Thanks guys.

Chilli, did you check the link Hugo put up?
Sounds fairly straightforward on that thread.
No mate! All this talk of "cards" gave me a headache. I'm guessing you buy a card, and have to "install" in within the pc box itself? Wouldn't know where to start!! Good ain't I ??!!

Vanya

2,058 posts

275 months

Tuesday 12th June 2007
quotequote all
Chilli, check out his linked thread.

Sh!t if I can follow it anyone can, seriously.
My eyes are prone to blurring over very quickly when the tech jargon kicks off too!

I'm lucky, I think, in that my kit is a laptop which means you go get your firewire cable and PCMCIA card (don't get a headache, that's a credit cardish sized thingy (but it's thickness like me is like 4 or 5 cards lying on top of each other), stick it in the... erm ... PCMCIA card slot and install etc.

Where I think I would have a problem (DIY wise) is if the PC was a desktop. In which case you have to start taking the lid and stuff.

And it's at that point where, as you so succinctly put it, I get a mate to do it!

Good luck anyway.

F.M

5,816 posts

251 months

Tuesday 12th June 2007
quotequote all
I`m like chili...not up to speed on video cards/fire wire thingy`s...

What I would do is record the footage from the camcorder onto the DVD recorder..then upload the DVD to my HD although you need...a DVD recorder...smile

Edited by F.M on Tuesday 12th June 09:55

Chilli

Original Poster:

17,320 posts

267 months

Tuesday 12th June 2007
quotequote all
Vanya said:
Chilli, check out his linked thread.

Sh!t if I can follow it anyone can, seriously.
My eyes are prone to blurring over very quickly when the tech jargon kicks off too!

I'm lucky, I think, in that my kit is a laptop which means you go get your firewire cable and PCMCIA card (don't get a headache, that's a credit cardish sized thingy (but it's thickness like me is like 4 or 5 cards lying on top of each other), stick it in the... erm ... PCMCIA card slot and install etc.

Where I think I would have a problem (DIY wise) is if the PC was a desktop. In which case you have to start taking the lid and stuff.

And it's at that point where, as you so succinctly put it, I get a mate to do it!

Good luck anyway.
Yeah, you see as soon as we start talking bout removing covers etc....forget it!!!

Cheers though, but I'll get me mate to do it for me!

hugoagogo

23,438 posts

264 months

Tuesday 12th June 2007
quotequote all
even if you have to open up the computer and fit a PCI firewire card - it really is ridiculously easy, it's like lego or something

if only car mods were as simple

Chilli

Original Poster:

17,320 posts

267 months

Tuesday 12th June 2007
quotequote all
hugoagogo said:
even if you have to open up the computer and fit a PCI firewire card - it really is ridiculously easy, it's like lego or something

if only car mods were as simple
Hmmm, I was banned from having lego as a kid.....too much carnage!!!

hugoagogo

23,438 posts

264 months

Tuesday 12th June 2007
quotequote all
biggrin
well, opening the case usually means removing two screws
(you can give the machine a good hoovering out at this point, if it's anything like mine you'll be amazed how much quieter is is when it isn't clogged with dust and having to make the fan work overtime)

remove one blanking plate, one screw
click the PCI card in place
put the screw back to hold it in
job done

just search on the net first so you recognise a PCI slot from a PCI express slot (which is different, obviously !?)
it's kinda creamy coloured, with one big slot with a notch in nearer one end and you'll probably have 3 or 4 of them down near the bottom of the computer

dern

14,055 posts

310 months

Tuesday 12th June 2007
quotequote all
hugoagogo said:
biggrin
well, opening the case usually means removing two screws
(you can give the machine a good hoovering out at this point, if it's anything like mine you'll be amazed how much quieter is is when it isn't clogged with dust and having to make the fan work overtime)

remove one blanking plate, one screw
click the PCI card in place
put the screw back to hold it in
job done

just search on the net first so you recognise a PCI slot from a PCI express slot (which is different, obviously !?)
it's kinda creamy coloured, with one big slot with a notch in nearer one end and you'll probably have 3 or 4 of them down near the bottom of the computer
The case being referred to will be the big noisy cream/black coloured box and not the bit with the moving pictures wink

Chilli

Original Poster:

17,320 posts

267 months

Thursday 14th June 2007
quotequote all
Cheers gents hehe