Scuderia Shields

[Jamster]

Can they be retro fitted to 360's that dont have them?

Cheers,
Jamster

PS Price to do the job?

[mike360]

you can get stick on ones that look exactly the same i dont belive they can be retro fitted. contact maranello sales

[andy355]

cant say for sure on the 360 but on the 355 the real ones are indented into the wings. So yes you could retro fit but it would involve 2 new wings, some paint and many english pounds

[LittleBro]

As stated above, these are sunk into the panels so cant be retro-fitted to be as per the factory. You can get plastic ones, which, IMO, look naff, but you can also buy ceramic ones from the US which are supposed to look a lot better, although I have never seen them in the flesh.

Good luck!

[Stolen-Recovered]

may be this can help you mate?????
http://cgi.ebay.co.uk/Scuderia-Ferrari-enamel-wing...

[Jamster]

cheers guys!

Edited by Jamster on Monday 11th June 22:24

[isuk]

This is the best place to get shields. I put a set on my 360 when I had it and they looked great. I can highly recommend them as the quality is superb and they look like the OEM shields http://www.yomagic.com/ 

[Murph7355]

isuk has it!

Yoshi's shields are thinner than stock, so they stick out from the wing about the same as recessed shields.

Look superb.

[Paracetamol]

isuk said:

This is the best place to get shields. I put a set on my 360 when I had it and they looked great. I can highly recommend them as the quality is superb and they look like the OEM shields http://www.yomagic.com/ 

WOO HOO! ISUK manages to get his point across in less than 4 lines

[Lars87]

you could just do this... Im am very satisfied with mine. Offcause its stock this way on my 348, but think its would look just as good on a 360.

[isuk]

Paracetamol said:

WOO HOO! ISUK manages to get his point across in less than 4 lines

Another less than helpful post to an OP and one with no bearing on the topic I'm sorry that you evidently have both a limited attention span and small vocabulary. Perhaps one day you will grow up and be able to take in more than text message size information

Edited by isuk on Tuesday 12th June 16:53

[Paracetamol]

isuk said:

Paracetamol said:

WOO HOO! ISUK manages to get his point across in less than 4 lines

Another less than helpful post to an OP and one with no bearing on the topic I'm sorry that you evidently have both a limited attention span and small vocabulary. Perhaps one day you will grow up and be able to take in more than text message size information

Edited by isuk on Tuesday 12th June 16:53

Actually, the topic to which you responded is very pertinent to me. I am currently considering the options for replacement of the wing-shields on my Ferrari 360 Modena. The current wing-shileds on the vehicle (applied by a previous owner) are resin based and appear to be rather tawdry in appearance. I intended to research the marketplace to discover suitable replacements. A key criteria in this research and selection process would be that the badges appear more representative of Ferrari's own application. By posting to this bulletin board you have alleviated the need for me to carry out this search and for this I am extremely grateful.

[or- I need some new badges for my 360- the ones on mine are crappy plastic- so thanks for posting] - top 1% educationally mate...still like getting my message across as succinctly as possible

Edited by Paracetamol on Tuesday 12th June 17:28

[isuk]

Paracetamol said:

top 1% educationally mate...

Edited by Paracetamol on Tuesday 12th June 17:28

You hide it remarkably well then I must concede

Happy to have been able to point you in the right direction though. A reminder to anyone buying from Yoshi - remember to factor in import duty on the price of the shields. He sends them by Fedex or UPS (I forget which one) and the delivery driver will not hand them over until you write out a cheque to cover the tax.

Edited by isuk on Tuesday 12th June 17:43

[Paracetamol]

isuk said:

Paracetamol said:

top 1% educationally mate...

Edited by Paracetamol on Tuesday 12th June 17:28

You hide it remarkably well then I must concede

Happy to have been able to point you in the right direction though. A reminder to anyone buying from Yoshi - remember to factor in import duty on the price of the shields. He sends them by Fedex or UPS (I forget which one) and the delivery driver will not hand them over until you write out a cheque to cover the tax.

Edited by isuk on Tuesday 12th June 17:43

Plenty of relatives over in the USofA so I'm sure we can smuggle some in

[Murph7355]

Lars87 said:

you could just do this... Im am very satisfied with mine. Offcause its stock this way on my 348, but think its would look just as good on a 360.

Aaaahhhhhrrrrrgghghgh my eyes. Resin hurst my eyes...

School book fodder.

[Lars87]

Murph7355 said:

Lars87 said:

you could just do this... Im am very satisfied with mine. Offcause its stock this way on my 348, but think its would look just as good on a 360.

Aaaahhhhhrrrrrgghghgh my eyes. Resin hurst my eyes...

School book fodder.

http://img248.imageshack.us/img248/9776/2itslrlrr6.gif

[Murph7355]

Lars87 said:

Murph7355 said:

Lars87 said:

you could just do this... Im am very satisfied with mine. Offcause its stock this way on my 348, but think its would look just as good on a 360.

Aaaahhhhhrrrrrgghghgh my eyes. Resin hurst my eyes...

School book fodder.

[LittleBro]

LOL! Thats class!!