I changed the coolant on my S1 but.....
I changed the coolant on my S1 but.....
Author
Discussion

jondude

Original Poster:

2,441 posts

248 months

Tuesday 12th June 2007
quotequote all
....I only got about 4 litres of the old stuff out!!

The main problem I had was I could not get the larger pipe to break free of the rubber hose - gently opening the gap with a screwdriver did produce a flow of coolant though, and I am pretty sure I got all out. Other side no problem.

I am guessing the fact I had the car slightly raised at the back must have meant the rest of the coolant stayed in the rad???

Lotus do say you won't be able to empty the matrix during a 'normal' coolant change... does that hold a couple of litres, perhaps?

Still, no leaks and a steadier 84 degress on the Stack now....if I have got 50% out, then I guess yearly changes should keep me nice and healthy.

( I pondered with the idea of blasting water up the sill pipes, to push the rad water out.....would that have worked??? )

To those thinking of doing this, it is fiddly and time consuming, but not that difficult - the bleed screw on the S1 can be reached through the access cover.