Discussion
Mine proved very easy. Pull off the horn push. Disconnect the two wires. Undo the big nut in the middle and slide the wheel off. Mine slid off nicely. The workshop manual refers to the use of a steering wheel puller requiring the removal of the plastic shrouds at the rear. My wheel was a snug fit but didn't need the use of a puller.
Remember to mark the position of the wheel before removing!
When refitting, the nut is tightened to 25Nm
Remember to mark the position of the wheel before removing!
When refitting, the nut is tightened to 25Nm
I've removed and fitted the wheel on both my S2 elises. It's a bit of a pain and the puller that I got (basically a bar of steel with a large bolt through it) isn't much good. All I got it to do was bend the metal framework of my steering wheel. I found that a couple of good jolts from behind the wheel frees it up nicely. Don't go at it with a hammer or anything, use your hands, in my experience you need a bit of a jolt to free it from the tapered spline. But remember to keep the bolt on so that you don't whack yourself in the nose when it comes free! A mechanic friend of mine tells me that he knows plenty of people with broken noses through doing that!
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


