help rear shock chim
Discussion
Hub nut was easier than I thought.
Back end up in the air, both wheels off the ground car out of gear so as not to stress the diff and gear train. Take off wheel, apply handbrake, fit 41mm socket (£8.95 from local motor factors) to hub nut with a long extension bar and hey presto!
Once Hub nut was loose, released handbrake, removed rear calliper and disc then pull off hub with hub puller.
Back end up in the air, both wheels off the ground car out of gear so as not to stress the diff and gear train. Take off wheel, apply handbrake, fit 41mm socket (£8.95 from local motor factors) to hub nut with a long extension bar and hey presto!
Once Hub nut was loose, released handbrake, removed rear calliper and disc then pull off hub with hub puller.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



please help fluid dripping from rear shocker n/s do i need to replace the whole shocker or just the strut and were do i get them from????? also wheel bearings gone ive been told this is a ford 4x4 please help phat dog
cheers every one for all ur help ill get on with it fingers crossed
you guys r g8 lots of good tips 