Oh gonads
Author
Discussion

Pigeon

Original Poster:

18,535 posts

277 months

Saturday 16th June 2007
quotequote all
Just picked up an old server... 2 x PIII 550MHz, 360GB HD space, but only 256MB of RAM.

So I grabbed a couple of spare RAM sticks and stuck them in it...

...and that simple operation appears to have screwed it. Even after removing them again it still refuses to boot.

Had it for 5 minutes and knackered it. Not happy...

sheets tabuer

21,543 posts

246 months

Saturday 16th June 2007
quotequote all
Thanks wink

NiceCupOfTea

25,608 posts

282 months

Saturday 16th June 2007
quotequote all
Never mind - it was utterly worthless anyway! You can probably find newer stuff being chucked out by schools rolleyes

Mind you, was at Nantes airport today and their departure screens are run by P75s running DOS!

andy_s

19,857 posts

290 months

Saturday 16th June 2007
quotequote all
sheets tabuer said:
Thanks wink
coffee

ThePassenger

6,962 posts

266 months

Saturday 16th June 2007
quotequote all
You know the drill ohh feathered one.
Chips n' cards out, get it beeping.

I'd try yoiking the CMOS battery as well.

Gretchen

19,809 posts

247 months

Saturday 16th June 2007
quotequote all
Oh dear.

I usually manage to put holes in clothes i've just taken the labels off!

Are you sure you don't just have a power cut?

cyberface

12,214 posts

288 months

Saturday 16th June 2007
quotequote all
Sounds like a LOT of hard drive space for a motherboard of that vintage, no?

Perhaps the drive controller can't handle the size of the disk.

ThePassenger

6,962 posts

266 months

Saturday 16th June 2007
quotequote all
cyberface said:
Sounds like a LOT of hard drive space for a motherboard of that vintage, no?

Perhaps the drive controller can't handle the size of the disk.
You'd be amazed just how many old dogs like that are still in racks as file servers, DNS and e-mail boxes. Sounds like a reasonable amount for an ex-file server.

Neil_Sc

2,258 posts

238 months

Saturday 16th June 2007
quotequote all
cyberface said:
Sounds like a LOT of hard drive space for a motherboard of that vintage, no?

Perhaps the drive controller can't handle the size of the disk.
Not if it's a server.

Pigeon

Original Poster:

18,535 posts

277 months

Saturday 16th June 2007
quotequote all
Ex file server is what it is. Had Back Orifice on it. Don't need much horsepower just to pull bits off disk and chuck them down an Ethernet cable smile Which is just what I was going to do with it...

Have now had it down to nothing but the motherboard, one CPU, one stick of memory and a keyboard plugged in to see the LEDs go on and off. Result: all three LEDs permanently on - so it's not even initialising the keyboard - and nary a beep. Taken it out of the case to make sure there were no screws/paperclips behind it - nothing. CMOS battery measures 3.00V. So I think it's had it.

At least it didn't cost me anything... It's a nice big case so it's tempting to squeeze some Athlon motherboards I've got into it running Mosix and make a multi-CPU machine that way just for the craic. Trouble is I've got no CPUs for them hehe so for the time being I've stuck an old single Celeron board in.

kiwisr

9,335 posts

238 months

Saturday 16th June 2007
quotequote all
If it's HP/Compaq it will need the specific memory recommended by the vendor.

Silent1

19,762 posts

266 months

Saturday 16th June 2007
quotequote all
Pigeon said:
Ex file server is what it is. Had Back Orifice on it. Don't need much horsepower just to pull bits off disk and chuck them down an Ethernet cable smile Which is just what I was going to do with it...

Have now had it down to nothing but the motherboard, one CPU, one stick of memory and a keyboard plugged in to see the LEDs go on and off. Result: all three LEDs permanently on - so it's not even initialising the keyboard - and nary a beep. Taken it out of the case to make sure there were no screws/paperclips behind it - nothing. CMOS battery measures 3.00V. So I think it's had it.

At least it didn't cost me anything... It's a nice big case so it's tempting to squeeze some Athlon motherboards I've got into it running Mosix and make a multi-CPU machine that way just for the craic. Trouble is I've got no CPUs for them hehe so for the time being I've stuck an old single Celeron board in.
i'm impressed but how you managed to boocks it pidge, is it the PSU?

Pigeon

Original Poster:

18,535 posts

277 months

Sunday 17th June 2007
quotequote all
kiwisr said:
If it's HP/Compaq it will need the specific memory recommended by the vendor.
Nope, generic Intel MB.
Silent1 said:
Pigeon said:
Ex file server is what it is. Had Back Orifice on it. Don't need much horsepower just to pull bits off disk and chuck them down an Ethernet cable smile Which is just what I was going to do with it...

Have now had it down to nothing but the motherboard, one CPU, one stick of memory and a keyboard plugged in to see the LEDs go on and off. Result: all three LEDs permanently on - so it's not even initialising the keyboard - and nary a beep. Taken it out of the case to make sure there were no screws/paperclips behind it - nothing. CMOS battery measures 3.00V. So I think it's had it.

At least it didn't cost me anything... It's a nice big case so it's tempting to squeeze some Athlon motherboards I've got into it running Mosix and make a multi-CPU machine that way just for the craic. Trouble is I've got no CPUs for them hehe so for the time being I've stuck an old single Celeron board in.
i'm impressed but how you managed to boocks it pidge, is it the PSU?
Tried a different PSU as well hehe

Silent1

19,762 posts

266 months

Sunday 17th June 2007
quotequote all
Pigeon said:
kiwisr said:
If it's HP/Compaq it will need the specific memory recommended by the vendor.
Nope, generic Intel MB.
Silent1 said:
Pigeon said:
Ex file server is what it is. Had Back Orifice on it. Don't need much horsepower just to pull bits off disk and chuck them down an Ethernet cable smile Which is just what I was going to do with it...

Have now had it down to nothing but the motherboard, one CPU, one stick of memory and a keyboard plugged in to see the LEDs go on and off. Result: all three LEDs permanently on - so it's not even initialising the keyboard - and nary a beep. Taken it out of the case to make sure there were no screws/paperclips behind it - nothing. CMOS battery measures 3.00V. So I think it's had it.

At least it didn't cost me anything... It's a nice big case so it's tempting to squeeze some Athlon motherboards I've got into it running Mosix and make a multi-CPU machine that way just for the craic. Trouble is I've got no CPUs for them hehe so for the time being I've stuck an old single Celeron board in.
i'm impressed but how you managed to boocks it pidge, is it the PSU?
Tried a different PSU as well hehe
tried taking out the old ram and just putting the new in?

Neil_Sc

2,258 posts

238 months

Sunday 17th June 2007
quotequote all
Or how about taking all RAM out and seeing if you can get the board to boot to a point that it tells you it's lacking RAM?

ThePassenger

6,962 posts

266 months

Sunday 17th June 2007
quotequote all
I think Pidg has been reminded of Rule 1.

If it ain't broke don't fcensoredk with it hehe

Pigeon

Original Poster:

18,535 posts

277 months

Sunday 17th June 2007
quotequote all
Silent1 said:
tried taking out the old ram and just putting the new in?
Yep smile
Neil_Sc said:
Or how about taking all RAM out and seeing if you can get the board to boot to a point that it tells you it's lacking RAM?
Same result...
ThePassenger said:
I think Pidg has been reminded of Rule 1.

If it ain't broke don't fcensoredk with it hehe
You could have a point there hehe

Interestingly it has now slightly changed its behaviour... instead of freezing with all keyboard lights on, it now gets as far as turning them off again before it freezes. Still no beeps and no video (onboard video). This is without me doing anything except drink coffee and smoke. As before, no possible variation on installed components or lack thereof alters this behaviour.

Makes me think it was dodgy anyway - bad connection / cracked track somewhere, buggered if I'm going to try looking for it hehe and so it probably was a good thing I decided to play with it, otherwise it might have fallen over with live data on it...

moleamol

15,887 posts

294 months

Sunday 17th June 2007
quotequote all
Could it be simply that you've killed it via the static contained on your feathered personage? As in dead motherboard.

d1bble

3,417 posts

294 months

Sunday 17th June 2007
quotequote all
Leave it overnight for the IT pixies to work their magic. Works for me.

Rebuilda

866 posts

236 months

Sunday 17th June 2007
quotequote all
I can sometimes get working processors from work. All used stock but a huge range. If there was something specific you had in mind...

Come to think of it, we have a few pallets of old servers being processed at the moment, whats the exact model and I wilhave a look for a replacement board too.

Edited by Rebuilda on Sunday 17th June 01:21