Blaupunkt iPod connecter
Discussion
J2LOT said:
which i-pod connector & where from how much? Fed up of i-trip!
Which Head Unit do you have? If it's Blaupunkt try www.bluespot.co.uk - wouldn't bother getting one from Lotus, probably pay well over the odds to wait twice as long!Edited by kevin ritson on Thursday 21st June 21:28
My head unit is a Frieberg CD34, not DAB.
Got the connector from http://www.lowcostcaraudio.co.uk/shop/Blaupunkt-iP...
There are different cables for different models, be careful which one you order
When you add up postage and all, worked out the cheapest.
Got the connector from http://www.lowcostcaraudio.co.uk/shop/Blaupunkt-iP...
There are different cables for different models, be careful which one you order
When you add up postage and all, worked out the cheapest.
Edited by Beachbum on Friday 22 June 10:34
kevin ritson said:
Easy peasy. Use the two-pronged things to get the HU out, connect cable, unscrew the speaker panel and feed wire through here to the shelf underneath. Also works with Satnavs that have headphone sockets for handsfree, MP3 and navigation via the stereo.
I assume the speaker panel helps in feeding the cable into the shelf, but how. Any photo's or more detailed explanation ?
No photos I'm afraid but what you need to do is:
1. Take out the Head Unit.
2. Unscrew the four screws at the edges of the speaker/vent panel (that's the whole panel - not just the speaker cover itself) The panel will come off easily.
3. Route the wire from the shelf under the stereo behind the speaker/vent panel (remember to route the wire round the vent!) to the back of the head unit. It can be a bit fiddly getting it round part of the chassis between the Head Unit and panel - tie the wire to a bit of string if necessary but have patience.
4. Plug lead into the back of the Head Unit.
5. Test connection out before putting things back.
6. Slot Head Unit back into the dash.
7. Screw speaker/vent panel back.
Done!
1. Take out the Head Unit.
2. Unscrew the four screws at the edges of the speaker/vent panel (that's the whole panel - not just the speaker cover itself) The panel will come off easily.
3. Route the wire from the shelf under the stereo behind the speaker/vent panel (remember to route the wire round the vent!) to the back of the head unit. It can be a bit fiddly getting it round part of the chassis between the Head Unit and panel - tie the wire to a bit of string if necessary but have patience.
4. Plug lead into the back of the Head Unit.
5. Test connection out before putting things back.
6. Slot Head Unit back into the dash.
7. Screw speaker/vent panel back.
Done!
Edited by kevin ritson on Friday 22 June 11:55
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff



