996 RS seatbelt

[MichM3]

Hi guys,

I'd like to know the part-nr of the Schroth seatbelt which is originally delivered by a 996 GT3 RS.

Anyone who could supply me with that nr?

kind regards,

Mich

[DanH]

MichM3 said:

Hi guys,

I'd like to know the part-nr of the Schroth seatbelt which is originally delivered by a 996 GT3 RS.

Anyone who could supply me with that nr?

kind regards,

Mich

They aren't quite the same anymore. The one that came with the car had the rip stitching on one shoulder belt. The current ones don't have that any more.

Part no is 996.803.037.95

I got mine from Porsche East London and it cost less than independents can supply them. Not sure if it was a cock up by my dealer or just a very competitive price.

[MichM3]

thanks for the info!!! great!

...this part nr reflects the 1 Schroth seatbelt, right?

regards,

Mich

[DanH]

MichM3 said:

thanks for the info!!! great!

...this part nr reflects the 1 Schroth seatbelt, right?

regards,

Mich

Yeah a full 6 point harness in red from your opc with correct fittings to mount to the sub frame mount and spacers you already have (in fact there are even bits you don't need in the box). You also need some torx sockets to fit them to take the seat out.

Also make sure you cover your sills and centre tunnel with a towel when removing the seat to protect them! The other trick is to tilt the seat forward whilst still in the cabin to get to the sockets underneath to disconnect them.

There may be a guide to all this on rennlist or renntech if you need pics etc. The connectors underneath are a bit non obvious in how they can be separated. It initially looks like cable ties will need cutting etc, but they don't.

Have fun. It's pretty easy as long as you have good quality tools and patience. It started getting dark when I did mine poor planning lol.

Edited by DanH on Friday 22 June 00:16

[MichM3]

thank you for the professional input!!...and to be honest, I do dispose of the same planning capacities as you!:-) -lol-