Powered USB2.0 hub
Discussion
Right, I need a few more USB ports on my PC, so bought a 4-port powered USB hub.
My PC only has USB1 & 1.1 ports but as USB2.0 is backwards-compatible and in any case is pretty much all anyone sells, I went for a 2.0 hub (D-Link DUB-H4).
According to everything I can find on the 'net, "it should just work". But it doesn't.
I get the usual "the high speed hub will function at a reduced speed" message as you'd expect but when Windows tries to install a driver for the hub it just bins it with "The hardware was not installed because the wizard cannot find the necessary software".
Running WinXP SP2 so it should have no problem.
I'm stumped.
As a separate issue I've ordered a USB2.0 controller card; am I expecting too much if I hope the hub will "just work" when plugged into a USB2.0 port once that's all installed?
My PC only has USB1 & 1.1 ports but as USB2.0 is backwards-compatible and in any case is pretty much all anyone sells, I went for a 2.0 hub (D-Link DUB-H4).
According to everything I can find on the 'net, "it should just work". But it doesn't.
I get the usual "the high speed hub will function at a reduced speed" message as you'd expect but when Windows tries to install a driver for the hub it just bins it with "The hardware was not installed because the wizard cannot find the necessary software".
Running WinXP SP2 so it should have no problem.
I'm stumped.
As a separate issue I've ordered a USB2.0 controller card; am I expecting too much if I hope the hub will "just work" when plugged into a USB2.0 port once that's all installed?
pdV6 said:
As a separate issue I've ordered a USB2.0 controller card; am I expecting too much if I hope the hub will "just work" when plugged into a USB2.0 port once that's all installed?
No you're not expecting to much, USB should 'just work', that's what it's billed as. Problem is, quite often it's not Window's fault (take a screen shot, Passenger NOT slating Windows, nobody'll believe you) but s
t drivers. Take for example a scanner I have, it's USB, install the drivers and it works. Now take the machine away and wire it back in, for arguments sake we'll say I was hoovering out the dust bunnies; if you don't plug the scanner in the the exact same port you installed it in... Windows has a funk because the drivers won't reinstall automatically. To be honest, the only thing I can think of is to go in to the hardware manager (Control Panel > System) and delete every USB device listed, including the root hubs. Reboot and let it redetect from the ground up, hopefully that'll kill off any hard coded links in crappy drivers. Alternatively if that doesn't work, Add/Remove Programs, bosh the driver on the head, reinstall it with the device plugged in to the hub.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


