Any one Got there wedge with them today

[TVRleigh]

I need a pic of the washer bottle,and mesurment of the size of the pipe that goes to the pump.

I off on holiday tomorrow and car is at home. and I can't find the orignal washer bottle. but planing to get a ali one made. so want to get sizes sent off to day so its made by the time I get back.

Thanks in advance
Leigh

[taimar78]

Leigh,
I could give you the measurements for one for the 280i but don't know if it's the same as on your V8 wedge.

Marshall

[D1 MAD]

Just measured mine which is the same as all the other Wedge washer bottles I have seen.

215mm tall inc 15mm filler cap (has a pointy bottom so sides a bit shorter)
150mm wide
110 deep at deepest point (bit of a pot belly shape)

Pipe spigot at base is 5mm diameter swelling to 6.5mm at end.
As best as I can measure the pipe it has an internal diameter of 4.5mm (I measured a new bit, not a used end)

Hope that helps.

[TVRleigh]

Thank you. for dimensions.

I could really do with a pic also, will help me find mine.

[D1 MAD]

Have some pictures ready but will have to Email them as posting them on here is a big mystery to me. Can you PM me an Email address

[D1 MAD]

At second attempt you should now have a collection of photo's in your Email. Hope they help.

[TVRleigh]

Thanks Steve,

Got them,

I think the 400SE tho has a slightly different one, who would have thought TVR's whould have non standard stuff

So Looking for an early 400SE type.

I think your pic's will do for the resdesign. mainly needed to know the pipe size.

I remember I put it someware safe as it was full of screen wash, prob have evaperated by now tho.