Wireless security
Author
Discussion

cjs

Original Poster:

11,723 posts

282 months

Tuesday 3rd July 2007
quotequote all
I run a Mac and have an Airport Express base station for wireless. I am currently running security at 128 WEP, question to our resident IT bods is, should I be running higher security or is this okay for home use? Is WAP a better option? Will it make my connection slower?

I was watching "the Real Hustlers" on TV last night and they sat outside a guys house and hacked into his wireless net even though he was using password protected WEP.......so they said on the Show!

LukeBird

17,170 posts

240 months

Tuesday 3rd July 2007
quotequote all
I used to run mine with WEP 128 but after reading around I thought WPA was certainly a more secure way to go...
I also check my DHCP client list most days just to see if anyone is there!
Also a common one is to turn on MAC address filtering (something I haven't done though!)
Perhaps someone can shed evenwink more light!

Edited by LukeBird on Tuesday 3rd July 10:35

mcflurry

9,192 posts

284 months

Tuesday 3rd July 2007
quotequote all
As long as you have more protection than "the next pc" you will probably be fine in a home environment. If a person could pickup unprotected wifi connections freely, why bother trying to crack a WEP key?

Gateway Networks

89 posts

236 months

Tuesday 3rd July 2007
quotequote all
it takes less than 5mins to crack a 128bit wep key.

WPA is the only option you should even consider if you decide to have a wireless connection.

yes its easier to just use an un-secured connection, but the people that go round "cracking" wireless security do it for the challenge, and the fact theres more likeley to be somethnig interesting behind a locked door than an unlocked one.

minimac

8,021 posts

234 months

Tuesday 3rd July 2007
quotequote all
WEP can be cracked in minutes, best to switch to WPA-PSK if your router supports it, with a password from grc.com/passwords.

</securitynut>

Zumbruk

7,848 posts

291 months

Tuesday 3rd July 2007
quotequote all
minimac said:
WEP can be cracked in minutes, best to switch to WPA-PSK if your router supports it, with a password from grc.com/passwords.
You're happy to give Mr. Gibson a list of passwords and (possibly) corresponding IP addresses, are you?

BaconBonce

579 posts

266 months

Tuesday 3rd July 2007
quotequote all
Can't understand why anyone would deliberately leave their wireless networks open for other people to use.

Think of all the nice illegal things that someone could do...all in your name.

cjs

Original Poster:

11,723 posts

282 months

Tuesday 3rd July 2007
quotequote all
I think I will bump my security level up to WAP. My Airport Express gives me options of WAP or WAP2, anyone know the difference?


I have just set the LED to flicker on activity, when I shut my Mac down I still had it indicating Activity! and the modem had PC activity flickering! Does anyone else have this? Have I got someone else on my WiFi?

Ian_T

258 posts

242 months

Tuesday 3rd July 2007
quotequote all
Yep. agree with the above. It's not your PC you should be worrying about as much as what someone can do with your connection. That's YOUR connection, which YOU pay for, in YOUR name. Let's see... hmm.. child pornography? Don't think the excuse "it wasn't me" is going to wash when the cops come knocking is it?

munky

5,328 posts

279 months

Tuesday 3rd July 2007
quotequote all
I use WEP + MAC filtering. WPA is of course better but my nabaztag only does WEP and I'm not spending £80 on the new version just to get WPA.

cjs

Original Poster:

11,723 posts

282 months

Tuesday 3rd July 2007
quotequote all
LukeBird said:
I used to run mine with WEP 128 but after reading around I thought WPA was certainly a more secure way to go...
I also check my DHCP client list most days just to see if anyone is there!
Also a common one is to turn on MAC address filtering (something I haven't done though!)
Perhaps someone can shed evenwink more light!

Edited by LukeBird on Tuesday 3rd July 10:35
How do I check my DHCP client list then? I'm running a Mac.

SLacKer

2,622 posts

238 months

Tuesday 3rd July 2007
quotequote all
cjs said:
LukeBird said:
I used to run mine with WEP 128 but after reading around I thought WPA was certainly a more secure way to go...
I also check my DHCP client list most days just to see if anyone is there!
Also a common one is to turn on MAC address filtering (something I haven't done though!)
Perhaps someone can shed evenwink more light!

Edited by LukeBird on Tuesday 3rd July 10:35
How do I check my DHCP client list then? I'm running a Mac.
This is on your router not your MAC. Each connection to the router will request an IP address from DHCP and the router logs it. Of course if your router IP address range is 192.168.0.* then someone can always attach with a fixed ip and therefore not be in the DHCP list.

Best bet is if you use WEP like the previous post said add MAC filtering (if supported) as then even if the key is broken the router rejects it on the basis of not having a valid MAC address.

K77-widow maker

910 posts

290 months

Tuesday 3rd July 2007
quotequote all
BaconBonce said:
Can't understand why anyone would deliberately leave their wireless networks open for other people to use.

Think of all the nice illegal things that someone could do...all in your name.
IMH...experience they are not tech minded ,and just think things are plug and play.

it leave the internet access dooor wide open for people surf and look for all sorts of things which would arouse interest from a certain Government agency!!