PRT or remote thermostat - what's best?
PRT or remote thermostat - what's best?
Author
Discussion

jjwprestidge

Original Poster:

36 posts

234 months

Tuesday 3rd July 2007
quotequote all
As I do a fair bit of track work I thought it might be wise to fit the Eliseparts remote thermostat kit to my S1 Elise.

However, I've also been reading about the pressure relief thermostat, as fitted to the late models of the MG TF. I assume that this is not the same thing as the remote thermostat, but which is the best solution, as I am a bit confused?

Thanks,

JP

shangani

3,069 posts

268 months

Tuesday 3rd July 2007
quotequote all
You want the PEL500150 82 degree pressure relief thermostat from any Landrover dealer. (at £48 ex VAT iirc)

They work a treat - the car runs cooler and it protects the head against repeated thermal shock.

StuartB

339 posts

266 months

Tuesday 3rd July 2007
quotequote all
I thought that they are one and the same, and to confuse matters slightly more some refer to them as PRRT or PR(R)T even

In any case, read this page
http://web.tiscali.it/elise_s1/index.htm

Pretty much explains everything in far more detail than you want or need

Edited by StuartB on Tuesday 3rd July 12:02

darren_S2

32 posts

233 months

Tuesday 3rd July 2007
quotequote all
Will this part fit an S2 and how easy to fit or is it best to get specialist to fit? Had my S2 (K-Series 120bhp) and touch wood no HGF yet, but if I can do something to help not turn my K Series into a Mayonaise maker then all for it.


jjwprestidge

Original Poster:

36 posts

234 months

Tuesday 3rd July 2007
quotequote all
shangani said:
You want the PEL500150 82 degree pressure relief thermostat from any Landrover dealer. (at £48 ex VAT iirc)

They work a treat - the car runs cooler and it protects the head against repeated thermal shock.
OK - thanks. Does this fit in the same place as the normal thermostat, or does it have a remote location, like the Eliseparts one?

JP

shangani

3,069 posts

268 months

Tuesday 3rd July 2007
quotequote all
You remove the old one and install the new one in a remote location up gainst the bulkhead. There are a few mods made to the plumbing when it is fitted, so best to get someone who knows what they are doing to fit it. It is similar to the eliseparts one, but works in a slightly different way - one is on the inlet to the engine, the other on the outlet, though I never remember which is which.

Highly recommended on the mod list.

lotustuart

1,465 posts

262 months

Tuesday 3rd July 2007
quotequote all
We fitted the (landrover part)PRT on our S2 135 and then a few months later had HGF so it is not a cure! But the car does run at lower temps now (fitted a 82 deg thermostat). I can`t hurt though! I like the idea the cars is running cooler!