DNS Replication
Discussion
Where do i tell the secondary server to trust and update from the primary server?
Will i need to set up a VPN between both servers?
Doesn't need to be megga redundant as the guy who originaly setup the network had both DNS servers on the same router at same place! lol
And we host our own domain so as soon as we went down we had no redundancy.
Liam
Will i need to set up a VPN between both servers?
Doesn't need to be megga redundant as the guy who originaly setup the network had both DNS servers on the same router at same place! lol
And we host our own domain so as soon as we went down we had no redundancy.
Liam
shocker-z said:
Where do i tell the secondary server to trust and update from the primary server?
Will i need to set up a VPN between both servers?
Doesn't need to be megga redundant as the guy who originaly setup the network had both DNS servers on the same router at same place! lol
And we host our own domain so as soon as we went down we had no redundancy.
Liam
It depends on the OS but the principle is that you add a Secondary DNS zone to the server that you want to be the secondary, and on the master you permit Zone Transfers Requests from the secondary.Will i need to set up a VPN between both servers?
Doesn't need to be megga redundant as the guy who originaly setup the network had both DNS servers on the same router at same place! lol
And we host our own domain so as soon as we went down we had no redundancy.
Liam
If it's your public facing DNS tbh I'd spend $30 a year and have it hosted by someone like easyDNS.
What's the context here?
Edited by hutchingsp on Wednesday 4th July 19:35
Not necessarily the OS that's important as what DNS server software you are running - if it's bind it could be any OS.
Using bind it's fairly simple - on the primary DNS server you have a master "named.conf" file which tells the server what zone files to load - it will need to contain a line which allows transfers to the secondary server:
allow-transfer { 1.2.3.2; };
Then a zone definition for each domain:
zone "blahblah.com" {
type master;
file "blahblah.txt";
};
Then you install bind on the secondary DNS server and setup the named file to look like this:
zone "blahblah.com" {
type slave;
file "blahblah.txt";
masters {
1.2.3.1;
};
};
Using bind it's fairly simple - on the primary DNS server you have a master "named.conf" file which tells the server what zone files to load - it will need to contain a line which allows transfers to the secondary server:
allow-transfer { 1.2.3.2; };
Then a zone definition for each domain:
zone "blahblah.com" {
type master;
file "blahblah.txt";
};
Then you install bind on the secondary DNS server and setup the named file to look like this:
zone "blahblah.com" {
type slave;
file "blahblah.txt";
masters {
1.2.3.1;
};
};
_dobbo_ said:
Not necessarily the OS that's important as what DNS server software you are running - if it's bind it could be any OS.
It does make a difference when it comes to setting it up, you obviously can use the MMC snap-in under Windows, in addition if Active Directory Integrated zones are being used then it is different again.Sorry for delay in getting back,
Its windows 2003 server with standard windows DNS server
It's external hence why were having them at 2 seperate locations, to be honest the records are rarley updated possible 10 changes in a month with 50+ domains in the list.
Regards and thanks to all
Liam
Its windows 2003 server with standard windows DNS server
It's external hence why were having them at 2 seperate locations, to be honest the records are rarley updated possible 10 changes in a month with 50+ domains in the list.
Regards and thanks to all
Liam
shocker-z said:
Sorry for delay in getting back,
Its windows 2003 server with standard windows DNS server
It's external hence why were having them at 2 seperate locations, to be honest the records are rarley updated possible 10 changes in a month with 50+ domains in the list.
Regards and thanks to all
Liam
OK so you'd need to add each zone (domain name) to the Secondary server and when asked specify that it's a secondary zone and when prompted specify the primary server.Its windows 2003 server with standard windows DNS server
It's external hence why were having them at 2 seperate locations, to be honest the records are rarley updated possible 10 changes in a month with 50+ domains in the list.
Regards and thanks to all
Liam
The important thing is to ensure you enable Zone Transfers on the Primary DNS server, and that you restrict the IP's that can perform a Zone Transfer to that of your Secondary.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


