Drivers seat lowering.
Discussion
Hi all, Does anyone know if there is anyway that the drivers seat in a s2 exige or s2 elise can be lowered, or if any company produce a product doing this. I am 6"3 and wearing a helmet is not the most comfortable ! so was wondering if you could lower it in anyway, i dont mind if the seat becomes fixed. Any help would be appreciated, thanks a lot.
It is very difficult to do with the standard elise, 340R or exige seat. They are attached at different points to the aftermarket seats. You could get someone to make you a custom mount, but the base of the seat is really thick and you will still likely have problems.
I had exactly the same problem with wearing a helmet (not 6 ft 3, but short legs and long body proportions) with the roof on (I couldn't).
I bought an eliseparts seat, made a custom mount and now the seats sits on the floor, tilted back a bit (more rake) this has gained me around 3-4cm of headroom. Not much, but enough to make a big difference. In retrospect I would get a CF Mog seat with an even thinner base and mount it the same way.
I had exactly the same problem with wearing a helmet (not 6 ft 3, but short legs and long body proportions) with the roof on (I couldn't).
I bought an eliseparts seat, made a custom mount and now the seats sits on the floor, tilted back a bit (more rake) this has gained me around 3-4cm of headroom. Not much, but enough to make a big difference. In retrospect I would get a CF Mog seat with an even thinner base and mount it the same way.
Just found this link, it may be worth a shot....!
DOWNlow Seat RailsDOWNlow Seat Rails, $225.00. Improve your overhead. This is the best solution for those with a longer torso, or greater than average height. ...
www.sector111.com/handler.cfm?cat_id=20219&cat... - 17k -
DOWNlow Seat RailsDOWNlow Seat Rails, $225.00. Improve your overhead. This is the best solution for those with a longer torso, or greater than average height. ...
www.sector111.com/handler.cfm?cat_id=20219&cat... - 17k -
it's either that or just change the seat for MOG's or the like with fixed rails...
done this to mine, and I have never got as low in the car as it is now, like me head is now a good 4" lower...
they look like this:

http://www.msar-safety.com/index.php?main_page=ind...
done this to mine, and I have never got as low in the car as it is now, like me head is now a good 4" lower...
they look like this:

http://www.msar-safety.com/index.php?main_page=ind...
I was wondering what the intrest would be in doing a group buy for the DOWNlow Seat Rails.
They are based in the USA so if we purchased on mass at least postage would be cheaper, let alone haggling for a reduction.
I will e mail them and ask about group reductions.
What do you think ????
www.sector111.com/handler.cfm?cat_id=20219&cat...
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


