125 amp fuse?????
Author
Discussion

T40ORA

Original Poster:

5,177 posts

249 months

Sunday 8th July 2007
quotequote all
Just posted this under Help, Battery not charging too.

Changing with great care and not a little trepidation the 100amp fuse as the battery has been dying.

Eventually got to where I've been told on here that the fuse is; slow but sure. Looks like I've found the carrier - by a cluster of 6 leads which I would have said were from the distibutor (or whatever the equivalent is) off to the plugs.

Flipped it open and inside..........is a :125 amp fuse! Held in by two small nuts/bolts.

Help; am I in the correct place? Just off to the local Motabitz/A1 store who stock a similar sounding fuse (125 at about the same length) in caes but any help would be much appreciated.

Dunno how to tell if this one is blown, as the 100 amp one that I have is just metal so pretty obvious. The 125 has a plastic bit in the middle.

Also, the nuts/bolts holding it look fine but one of those by the carrier looks a bit rusty/corroded.

All contributions gratefully received....

PS Been on trickle charge since Friday night and battery is still not full. Does this look like a battery problem rather than fuse?