Cable signals and TV cards.....
Cable signals and TV cards.....
Author
Discussion

beanbag

Original Poster:

7,346 posts

272 months

Wednesday 11th July 2007
quotequote all
Since we're talking about TV cards here recently, I thought I might spice things up a little with my own question.

I've got an MCE rig under the LCD and it works great. Really great. I can stream my movies, pictures, listen to my entire music collection, check out the TV guide, weather, online content, etc, etc....HOWEVER! The TV quality is....crap. I've tried everything. And I really mean everything. It's totally acceptable on a CRT telly, but the moment you watch the TV on an LCD, you really see how bad the quality is compared to when connected directly to the antenna input on the TV.

I've tried increasing the bit-rate, but since the signal is analogue, I'm not expecting much of a difference. I did however try out the digital terrestrial (Only 3 channels here in Austria), and the quality is superb as expected.

So after a little browsing around for a solution, I heard one person say you can use a cable PCI TV tuner in the telly working with the DVB-C digital signal cable companies use. Unfortunately this was from a very old post on a forum and the chap was very scarce with details and no longer posts on the forum.

If this is the case, does it mean I can detach my cable box and hook up one of these cards instead. It would mean I get a direct MPEG picture on the PC and there a much better picture on the telly instead as I do with the digital terrestrial picture.....

Hopefully I haven't gone too technical and I'm still making sense!

If anyone has managed the same in the UK, please let me know as i'd be really interested to hear about it!

Cheers,

BB

Trooper2

6,676 posts

262 months

Wednesday 11th July 2007
quotequote all
Back in the day when I had cable TV, I installed a Pinnacle PCTV Pro tuner card in my computer and then put a splitter on my TV cable line and ran one to the TV and one to the computer. I got 250 channels on the TV (what I was paying for) and 100 on the computer (limited by the PCI cards tuner). It even had a remote and S-video out, so I could send video from the computer to the TV, VCR, Etc. More expensive versions had the ability to work as a DVR as well.

Is this what you are referring to?

Edited by Trooper2 on Wednesday 11th July 17:08

MarfGTxx

22,907 posts

272 months

Wednesday 11th July 2007
quotequote all
Try this:-

http://deinterlace.sourceforge.net/downloads.htm

I bought a Hauppage WinTV PCI card some time back and the picture quality using the supplied software was for want of better word, cr@p.

DScaler transformed the picture quality, and best of all, its free wink

ThePassenger

6,962 posts

266 months

Wednesday 11th July 2007
quotequote all
It depends is the long and short of it, more so because you're in Australia and I know bugger all about it smile

Basically, if you're cable system is like the American system then you might just able able to drop a DVB-C type card in and away she goes.
However, if you're cable system is like the UK system (STB acts as a decrypt with an appropriate smart card)... I'd give up now on the idea of jacking the feed straight in to the PC. You'll need a CAM module bolt on to the PCI card and handle looking after the smart card, that will require software as well. All of it a bit of a lash up really.

What you might be able to do is go: STB -> SCART/SVideo -> Capture Card. That'll give you the best quality anolouge signal in. After that google for MCE iRBlaster and you'll find yourself looking at gadgets that let Media Centre change channels on the box.

I know it's not what you were looking for but encrypted cable is pretty much a none starter.