Dead PC................ XP installation issues
Discussion
Hi,
I'm really hoping someone can provide a little advice.
For the last couple of months, my self built PC has been behaving very badly. Randomly shutting down applications due to 'errors' and sometimes re-booting itself.
After trying many options to fix it I taken the decision to re-install XP on a new hard drive.
Basically, I've booted from the XP SP1 Home edition disk, it formats the drive, loads the files (with a few attempts required for some) and reboots. The XP loading screen comes up then the installation screen. When the process gets to the end of 'installing networks' it stops (at about 30 mins to go). The onscreen graphic continues but all HD & CDROM activity ceases. This has happened each of the four times I've tried.
Has anyone seen this before?
Many thanks in advance.
I'm really hoping someone can provide a little advice.
For the last couple of months, my self built PC has been behaving very badly. Randomly shutting down applications due to 'errors' and sometimes re-booting itself.
After trying many options to fix it I taken the decision to re-install XP on a new hard drive.
Basically, I've booted from the XP SP1 Home edition disk, it formats the drive, loads the files (with a few attempts required for some) and reboots. The XP loading screen comes up then the installation screen. When the process gets to the end of 'installing networks' it stops (at about 30 mins to go). The onscreen graphic continues but all HD & CDROM activity ceases. This has happened each of the four times I've tried.

Has anyone seen this before?
Many thanks in advance.
I'd hit the things with something like Bart's or similar. Then procede to thrash the system vis a vi chkdsk (set to surface scan). Possibly grab a Linux Live CD or anything that'll memtest the box as well, just to be safe (Bart's will probably do the memtest anyway).
It could be the drive is on it's last legs, or something inside the machine is overheating. CPU's are the most common one and you'll know if that sucker starts cooking, but northbridge/southbridge's can also overheat and cause very random weirdness when they do. Windows rebooting is the default behaviour for a BSOD these days, so it could have been falling over and trying to recover, no way to tell now obviously
I'd also crack open the side panel and attack the insides with a compressed air can and soft bristled paint brush. Fire the machine up and make sure all the fans are spinning properly, replace any that aren't. Whilst you're inside the beast and it's powered down (remove the power lead) push home all the cables and addin cards, memory as well for the belt & braces approach, also have a sniff for that 'overheating electronics' smell around the PSU area; burnt dust attached to things is also a sign of 'opps' and might indicate a replacement is in order.
Actually do the cleaning first then use Bart's.
It could be the drive is on it's last legs, or something inside the machine is overheating. CPU's are the most common one and you'll know if that sucker starts cooking, but northbridge/southbridge's can also overheat and cause very random weirdness when they do. Windows rebooting is the default behaviour for a BSOD these days, so it could have been falling over and trying to recover, no way to tell now obviously

I'd also crack open the side panel and attack the insides with a compressed air can and soft bristled paint brush. Fire the machine up and make sure all the fans are spinning properly, replace any that aren't. Whilst you're inside the beast and it's powered down (remove the power lead) push home all the cables and addin cards, memory as well for the belt & braces approach, also have a sniff for that 'overheating electronics' smell around the PSU area; burnt dust attached to things is also a sign of 'opps' and might indicate a replacement is in order.
Actually do the cleaning first then use Bart's.
ThePassenger said:
I'd hit the things with something like Bart's or similar. Then procede to thrash the system vis a vi chkdsk (set to surface scan). Possibly grab a Linux Live CD or anything that'll memtest the box as well, just to be safe (Bart's will probably do the memtest anyway).
It could be the drive is on it's last legs, or something inside the machine is overheating. CPU's are the most common one and you'll know if that sucker starts cooking, but northbridge/southbridge's can also overheat and cause very random weirdness when they do. Windows rebooting is the default behaviour for a BSOD these days, so it could have been falling over and trying to recover, no way to tell now obviously
I'd also crack open the side panel and attack the insides with a compressed air can and soft bristled paint brush. Fire the machine up and make sure all the fans are spinning properly, replace any that aren't. Whilst you're inside the beast and it's powered down (remove the power lead) push home all the cables and addin cards, memory as well for the belt & braces approach, also have a sniff for that 'overheating electronics' smell around the PSU area; burnt dust attached to things is also a sign of 'opps' and might indicate a replacement is in order.
Actually do the cleaning first then use Bart's.
Sorry, I'm a few runs down the ladder on IT knowledge.It could be the drive is on it's last legs, or something inside the machine is overheating. CPU's are the most common one and you'll know if that sucker starts cooking, but northbridge/southbridge's can also overheat and cause very random weirdness when they do. Windows rebooting is the default behaviour for a BSOD these days, so it could have been falling over and trying to recover, no way to tell now obviously

I'd also crack open the side panel and attack the insides with a compressed air can and soft bristled paint brush. Fire the machine up and make sure all the fans are spinning properly, replace any that aren't. Whilst you're inside the beast and it's powered down (remove the power lead) push home all the cables and addin cards, memory as well for the belt & braces approach, also have a sniff for that 'overheating electronics' smell around the PSU area; burnt dust attached to things is also a sign of 'opps' and might indicate a replacement is in order.
Actually do the cleaning first then use Bart's.
What is Bart's etc and BSOD.
After a prolonged period of working on the machine I checked the chip temps, all ok. Fans and interior have all been cleaned and work fine.
Doh, hadn't thought about re fitting memory or connectors. I'll try this evening. Thanks for your help.
Bat Fink said:
What is Bart's etc and BSOD.
BSOD, Blue Screen Of Death. On NT based systems this is a blue screen, white text usually with the word "STOP" at the very top. By default, XP reboots instantly when one happens, which is annoying as it's often useful to figure out what's gone bang. Bart's, sorry should have said. BartPE, in essence it's a LiveCD of Windows, so you can boot from the CD/DVD in to a puka version of Windows that has various utilities kicking around.
Try downloading either the Microsoft memory checker
http://oca.microsoft.com/en/windiag.asp
or memtest86
http://www.memtest.org/
and create a bootable CD and run.
Either of these will pick up any memory problems. I had a similar problem with a new pc and the MS memory diagnostic tool found one strip of ram to be defective. I had it replaced and the machine now runs fine.
http://oca.microsoft.com/en/windiag.asp
or memtest86
http://www.memtest.org/
and create a bootable CD and run.
Either of these will pick up any memory problems. I had a similar problem with a new pc and the MS memory diagnostic tool found one strip of ram to be defective. I had it replaced and the machine now runs fine.
Many thanks for all your help.
I removed the older of the two memory DIMM's and ran the install from the new DVD drive.
Result - it flew through the process and worked fine.
All I have to do now is work out why IE decides to shut itself down! At least the box works, which is a start.
Thanks again.
I removed the older of the two memory DIMM's and ran the install from the new DVD drive.
Result - it flew through the process and worked fine.
All I have to do now is work out why IE decides to shut itself down! At least the box works, which is a start.
Thanks again.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff



