Graphics Card upgrade- compatibility
Discussion
After some thought, I will probably just upgrade the graphics card which is a Nvidia 6200 AGP 8X 256mb.
My system is a 2.86Ghz Dell, with 512mb RAM,
I was looking at a mid range card, perhaps with 512mb, and for AGP I found this:
http://www.tigerdirect.com/applications/SearchTool...

Its looks like itll do the trick, however on closer inspection, the connector to the computer is different to mine:

Will it connect? And if not, whats the best card i can get..I have just picked up the LOTR online, and my computer just has the most abysmal framerate...
THANKS
best,
adam
My system is a 2.86Ghz Dell, with 512mb RAM,
I was looking at a mid range card, perhaps with 512mb, and for AGP I found this:
http://www.tigerdirect.com/applications/SearchTool...

Its looks like itll do the trick, however on closer inspection, the connector to the computer is different to mine:

Will it connect? And if not, whats the best card i can get..I have just picked up the LOTR online, and my computer just has the most abysmal framerate...

THANKS

best,
adam
Ok two things.
First of all, the second card is itsybitsy hence the huge size of the connector. It's also AGP 4x (or maybe 2X looking at it). The top card is, comparative speaking HOOOOGE hence the small connector (that looks to be AGP 8x).
If you've made sure your system has an AGP 8x slot and the card your buying is AGP 8x then you're laughing.
First of all, the second card is itsybitsy hence the huge size of the connector. It's also AGP 4x (or maybe 2X looking at it). The top card is, comparative speaking HOOOOGE hence the small connector (that looks to be AGP 8x).
If you've made sure your system has an AGP 8x slot and the card your buying is AGP 8x then you're laughing.
AdamT said:
I was doing a bit of research, and i think that the difference is that the card above (the one i have) is 1.5V and 3.3V motherboard combatible, however the bottom one is only 3.3V-my motherboard is of course 1.5V....
im now searching for the best 1.5V motherboard....
dont you mean graphics card?im now searching for the best 1.5V motherboard....
AdamT said:
I was doing a bit of research, and i think that the difference is that the card above (the one i have) is 1.5V and 3.3V motherboard combatible, however the bottom one is only 3.3V-my motherboard is of course 1.5V....
im now searching for the best 1.5V motherboard....
So you're after what? An AGP 4x card or an AGP 2x? Ebay would be good for that.im now searching for the best 1.5V motherboard....
Depending on the age of your machine and who made it, getting a mobo might be a trifle tricky. Dell's PC's are often none standard layouts, basically the holes in the board and the risers on the case to screw the sucker in don't match, for example. HP/Compaq are the same. So you're looking for a new mobo and case.
Then you'll discover that your class of P4 is no longer supported by practically anyone and won't fit in to the board. So your now at a new mobo, case, CPU.
Which brings us round to RAM. Are you using DDR? RDRAM? SDRAM? or DDRII? If you're using anything other than DDR or DDRII, you'll now be looking at mobo, case, CPU, RAM. In fact if the CPU you've picked is a Core 2, you'll need DDRII for it.
Graphics card, well with a new mobo you've got PCI-Express, so that's easy. Everything is PCI-E these days.
So having now gone through all that malarky virtually, best to either ebay an old AGP 4x card and retire the machine to 'internet flunky' status or but a whole new one and transfer your data over.

Or have a look in your nearest CeX (Computer Exchange - www.cex.co.uk). They sell second hand components and you may well find what you need there.
Even if your mainboard is a 4x Agp socket,you can still get a 8x card to run but only at the 4x speed(bit of a bottleneck but works fine in practice)the default volts are 1.5v for both,a good midrange card for you and very cheap is the ATI 9800 pro(was once high end)and can be purchased for silly money(bargain) and will wipe the floor with your Nvidea 6200.
That Daddy said:
Even if your mainboard is a 4x Agp socket,you can still get a 8x card to run but only at the 4x speed(bit of a bottleneck but works fine in practice)the default volts are 1.5v for both,a good midrange card for you and very cheap is the ATI 9800 pro(was once high end)and can be purchased for silly money(bargain) and will wipe the floor with your Nvidea 6200.
Depends I'm afraid. Some AGP 8x cards will run in 4x mode. Others won't, problem is cards that do won't be obviously labelled as such nor will cards that don't. It'd be best to aim low and get one specifically sold as AGP 4x/8x compatible and moan like murder if it doesn't work 
ThePassenger said:
That Daddy said:
Even if your mainboard is a 4x Agp socket,you can still get a 8x card to run but only at the 4x speed(bit of a bottleneck but works fine in practice)the default volts are 1.5v for both,a good midrange card for you and very cheap is the ATI 9800 pro(was once high end)and can be purchased for silly money(bargain) and will wipe the floor with your Nvidea 6200.
Depends I'm afraid. Some AGP 8x cards will run in 4x mode. Others won't, problem is cards that do won't be obviously labelled as such nor will cards that don't. It'd be best to aim low and get one specifically sold as AGP 4x/8x compatible and moan like murder if it doesn't work 

Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff





