Elise Clutch prob - Help please
Discussion
I would appreciate any advise or feedback concerning a clutch prob on my Mk11 2002 Elise.
Having reversed the car out of the garage I then discovered that the clutch pedal was extremely difficult to depress and I was unable to get the car in gear to drive.
It was also noted that when attempting to depress the clutch pedal the mounting bracket for the slave cylinder was actually moving and twisting with the effort !
Having spoken to a Lotus main dealer it would appear that an actual clutch failure is quite unusual but if a replacement is reqd they set aside 8hrs labour as apparently is is one bitch of a job.
I would therefore appreciate any feedback from anyone who had any similar problems with the clutch pedal being extremely difficult to depress.
I am unsure at the moment wether it is an actual clutch failure or wether problems with the slave cylinder etc may have the same effect.
With only 33k miles on the clock I would be extremely peeved if the clutch has failed already.
Thanks for any help - Eos
Having reversed the car out of the garage I then discovered that the clutch pedal was extremely difficult to depress and I was unable to get the car in gear to drive.
It was also noted that when attempting to depress the clutch pedal the mounting bracket for the slave cylinder was actually moving and twisting with the effort !
Having spoken to a Lotus main dealer it would appear that an actual clutch failure is quite unusual but if a replacement is reqd they set aside 8hrs labour as apparently is is one bitch of a job.
I would therefore appreciate any feedback from anyone who had any similar problems with the clutch pedal being extremely difficult to depress.
I am unsure at the moment wether it is an actual clutch failure or wether problems with the slave cylinder etc may have the same effect.
With only 33k miles on the clock I would be extremely peeved if the clutch has failed already.
Thanks for any help - Eos
It sounds much more likely that the spindle carrying the release fork is partially seizing. When this happens, the slave struggles to stay still on its mounts!
Its not unlnown for them to seize to such an extent that they fail to return completely and actually cause the clutch to remain disengaged.
Check the mounting bracket for the slave cylinder just incase its fractured or worked loose.
If it is a stiff spindle then its a gearbox out job to fix, Im afraid. In the past I've tried trickling penetrating oil down the spindle but it never works - the bush often seizes in the lower bush and you cant get at that.
Needless to say, if the gearbox is out you may as well pop in a new clutch kit while you have access.
Its not unlnown for them to seize to such an extent that they fail to return completely and actually cause the clutch to remain disengaged.
Check the mounting bracket for the slave cylinder just incase its fractured or worked loose.
If it is a stiff spindle then its a gearbox out job to fix, Im afraid. In the past I've tried trickling penetrating oil down the spindle but it never works - the bush often seizes in the lower bush and you cant get at that.
Needless to say, if the gearbox is out you may as well pop in a new clutch kit while you have access.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


