Double Bubble Screen
Discussion
I'm after a new screen for my CBR600F, mainly to try and get out of the wind blast. Had a lookie round t'internet and at a bit of a loss at to which ones are best. There are some real cheapo ones about £15, then some more expensive ones about £50-£60. Not really after an iridium one, just plain on light tint on it would be fine, though there's loads out there, just haven't a clue which ones would give the best fit etc.
Suggestions as always much appreciated
Suggestions as always much appreciated
D_T_W said:
Thanks chaps, i'll go and have a scout around t'internet to see if i can find one
here you go matehttp://www.lm-spares.co.uk/acatalog/Honda_F_Fabbri...
y2blade said:
D_T_W said:
Thanks chaps, i'll go and have a scout around t'internet to see if i can find one
here you go matehttp://www.lm-spares.co.uk/acatalog/Honda_F_Fabbri...
One problem i'm finding is that the years they have listed never seem to cover my bike. It's an 06 on a 56 plate, but all the ones i've seen so far only list the model year up to 03 or 04
Is there a difference, or am i just being a bit dim?
D_T_W said:
y2blade said:
D_T_W said:
Thanks chaps, i'll go and have a scout around t'internet to see if i can find one
here you go matehttp://www.lm-spares.co.uk/acatalog/Honda_F_Fabbri...
One problem i'm finding is that the years they have listed never seem to cover my bike. It's an 06 on a 56 plate, but all the ones i've seen so far only list the model year up to 03 or 04
Is there a difference, or am i just being a bit dim?
Sales Hotline 01432 850055
I'd recommend Puig/Motoplastic double bubble screens.
I've had then on a couple of different bikes and the quality is the best out there. They are polycarbonate so shatter proof (doesn't mean unbreakable, just it shouldn't shatter on impact), they fit very well but as I recall fitting onto a CBR600F is a PITA and they are available in either dark tint (see through) and light tint (grey). The CBR600f remains cosmetically unchanged except for paint schemes since 2001 so you'll have no problems sourcing any aftermarket stuff for it.
Wouldn't recommend clear as I've known of bikes that have had there clocks melted by the screens magnifying the suns rays!
Pyramid Plastics sell them as there own but also stock Skidmarx screens so if you buy from them make sure it's a Puig screen you get. Think Busters sell them and Crescent as they use them on the MotoGP bikes as well as many other top racing teams.
I've had then on a couple of different bikes and the quality is the best out there. They are polycarbonate so shatter proof (doesn't mean unbreakable, just it shouldn't shatter on impact), they fit very well but as I recall fitting onto a CBR600F is a PITA and they are available in either dark tint (see through) and light tint (grey). The CBR600f remains cosmetically unchanged except for paint schemes since 2001 so you'll have no problems sourcing any aftermarket stuff for it.
Wouldn't recommend clear as I've known of bikes that have had there clocks melted by the screens magnifying the suns rays!
Pyramid Plastics sell them as there own but also stock Skidmarx screens so if you buy from them make sure it's a Puig screen you get. Think Busters sell them and Crescent as they use them on the MotoGP bikes as well as many other top racing teams.
y2blade said:
Are you just hovering with google on standby??? 
I'll have a look at both, see who has what and for how much.
Cheers lads
D_T_W said:
y2blade said:
Are you just hovering with google on standby??? Cheers lads
your welcome
y2blade said:
D_T_W said:
y2blade said:
D_T_W said:
Thanks chaps, i'll go and have a scout around t'internet to see if i can find one
here you go matehttp://www.lm-spares.co.uk/acatalog/Honda_F_Fabbri...
One problem i'm finding is that the years they have listed never seem to cover my bike. It's an 06 on a 56 plate, but all the ones i've seen so far only list the model year up to 03 or 04
Is there a difference, or am i just being a bit dim?
Sales Hotline 01432 850055
They sold me a wrong part once... then when i took it back they tried to give me the SAME part back on purpose pretending it was the right one, i knew it, and they knew i knew it and gave up the pretence...
They said come back next week and they'd have the right one in.. I did, and they tried to give me the same one again!
I asked for a refund and they tried to knock off 2 deductions for stock handling etc I played merry hell with them until they gave up.
People in the trade know not to go near them. Blade do you live near Hereford or something? Or do you work at LM???
Conian said:
y2blade said:
D_T_W said:
y2blade said:
D_T_W said:
Thanks chaps, i'll go and have a scout around t'internet to see if i can find one
here you go matehttp://www.lm-spares.co.uk/acatalog/Honda_F_Fabbri...
One problem i'm finding is that the years they have listed never seem to cover my bike. It's an 06 on a 56 plate, but all the ones i've seen so far only list the model year up to 03 or 04
Is there a difference, or am i just being a bit dim?
Sales Hotline 01432 850055
They sold me a wrong part once... then when i took it back they tried to give me the SAME part back on purpose pretending it was the right one, i knew it, and they knew i knew it and gave up the pretence...
They said come back next week and they'd have the right one in.. I did, and they tried to give me the same one again!
I asked for a refund and they tried to knock off 2 deductions for stock handling etc I played merry hell with them until they gave up.
People in the trade know not to go near them. Blade do you live near Hereford or something? Or do you work at LM???
buy your screen from M&P then..they sell them all
http://www.mandp.co.uk/
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff