8800GTX in a HTPC, you betcha!
Author
Discussion

chris watton

Original Poster:

22,552 posts

291 months

Thursday 9th August 2007
quotequote all
Don’t know why I’m posting this, but I feel a little ‘chuffed’ with myself! I have managed to ‘shoehorn’ a new ATX Gigabite P35 mobo with 2 GB of memory, a new 2.66 MHz E6750 C2D, a 8800GTX, a 500 and 250GB HDD, and a SATA DVD drive into a small SilverStone HTPC case! The internals did require a LOT of hacking and slashing with the hacksaw, though!

Have had it running all day with benchmarks, and has been fine (Vista Ultimate, and a 5.6 score on Vista performance!), the new C2D 6750 runs very cool compared to the AMD 4600 it replaced.

So, if you want a powerful HTPC to sit under the TV, it can be done!

Zod

35,295 posts

289 months

Thursday 9th August 2007
quotequote all
Hmmm, those 88000GTXs run very, very hot, you know.

chris watton

Original Poster:

22,552 posts

291 months

Thursday 9th August 2007
quotequote all
Zod said:
Hmmm, those 88000GTXs run very, very hot, you know.
I know, was a bit worried about that, but the kids have been on it most of the day, and been playing TDU tonight, all fine! Although I did make sure there was a nice big gap between the 8800 and anything else, with a nice unrestricted airflow going through it.

tommundy

686 posts

249 months

Thursday 9th August 2007
quotequote all
chris watton said:
Zod said:
Hmmm, those 88000GTXs run very, very hot, you know.
I know, was a bit worried about that, but the kids have been on it most of the day, and been playing TDU tonight, all fine! Although I did make sure there was a nice big gap between the 8800 and anything else, with a nice unrestricted airflow going through it.
Actual temps checked? Sounds like a nice setup though cool

Cheers
Tom

ThePassenger

6,962 posts

266 months

Thursday 9th August 2007
quotequote all
You sir are insane!

I demand technoporn to letch over, go get your camera smile

chris watton

Original Poster:

22,552 posts

291 months

Friday 10th August 2007
quotequote all
I will try and take some pics smile. I did cut the HD bay to half size so the GPU would fit (still could take 3 HD's), and fitted a fan at the front which blows air directly on the GPU, and the CPU had that Coolermaster Mars heatsink. I think what also helps is that there are no ribbin cables, they are all thin SATA cables.

Still, it does look funny, like fitting a 1:32nd jet engine to a 1:72nd scale model! lol

rsv gone!

11,288 posts

272 months

Friday 10th August 2007
quotequote all
That's good going. My GTX is huge and only just fits in my Coolermaster tower. Pics needed...

chris watton

Original Poster:

22,552 posts

291 months

Friday 10th August 2007
quotequote all
rsv gone! said:
That's good going. My GTX is huge and only just fits in my Coolermaster tower. Pics needed...
I know, the GTX covers over two thirds if the case!. I was careful choosing the mobo too, and looked for one that had the CPU closer to the I/O port, and had the SATA sockets not directly in line with with the PCI-E slot! I didn't get the most expensive mobo, like I usually do, as I have come to the conclusion that they are just not worth the extra. (Had a M2N23 SLI Delux before this, and lasted less than a year, and the Striker Extreme I have in my work PC is not all it's cracked up to be for a £200+ mobo - if you swith the power off, the BIOS resets itself everytime, no matter what BIOS update I flash - bit of a pain with a RAID0 set up!).
So, I chose this;
http://www.scan.co.uk/Products/ProductInfo.asp?Web...

All slots/sockets are nicely spread out (even the memory slots!)

My only prob is my OEM Vista Ultimate, because I had already activated it when I tried it for a day on my works PC, before re-installing XP, it won't let me activate it again! Looks like I'll have to buy another copy!

rsv gone!

11,288 posts

272 months

Friday 10th August 2007
quotequote all
I had mobo probs when I was looking at s939 ones a while back. I bought a Fata1ity one which seemed to be quick but it kept falling over. I had to RMA and went for an Asus heatpipe one.

I was considering a C2D 6750 same as yours. The 1333 FSB DDR3 memory seems to be pretty scarily priced, though.

chris watton

Original Poster:

22,552 posts

291 months

Friday 10th August 2007
quotequote all
rsv gone! said:
I had mobo probs when I was looking at s939 ones a while back. I bought a Fata1ity one which seemed to be quick but it kept falling over. I had to RMA and went for an Asus heatpipe one.

I was considering a C2D 6750 same as yours. The 1333 FSB DDR3 memory seems to be pretty scarily priced, though.
I am running DDR2 in mine, and I see no performance issues whatsoever. The 6750 is good, not only for the FSB, but when not under load, it throttles down to 1.6GHz,(This happened a lot whilst installing Vista) I have even seen the heatsink fan stop, it's so cool. (I did think this was a fault at first, but once under load, it starts again!)


Edited by chris watton on Friday 10th August 09:47

rsv gone!

11,288 posts

272 months

Friday 10th August 2007
quotequote all
chris watton said:
I am running DDR2 in mine, and I see no performance issues whatsoever. The 6750 is good, not only for the FSB, but when not under load, it throttles down to 1.6GHz,(This happened a lot whilst installing Vista) I have even seen the heatsink fan stop, it's so cool. (I did think this was a fault at first, but once under load, it starts again!)
I read a review on Hexus and they reckoned that top end DDR2 was cheaper and just as quick as current DDR3.

tommundy

686 posts

249 months

Friday 10th August 2007
quotequote all
rsv gone! said:
chris watton said:
I am running DDR2 in mine, and I see no performance issues whatsoever. The 6750 is good, not only for the FSB, but when not under load, it throttles down to 1.6GHz,(This happened a lot whilst installing Vista) I have even seen the heatsink fan stop, it's so cool. (I did think this was a fault at first, but once under load, it starts again!)
I read a review on Hexus and they reckoned that top end DDR2 was cheaper and just as quick as current DDR3.
Yeah, it takes a good year or so for them to get the CAS Latency down to take advantage of all that memory bandwidth. I've got DDR1 550MHz cas 2, and DDR2 modules that are faster only started to appear a bit ago.

Tom

spants

1,090 posts

258 months

Friday 10th August 2007
quotequote all
chris watton said:
My only prob is my OEM Vista Ultimate, because I had already activated it when I tried it for a day on my works PC, before re-installing XP, it won't let me activate it again! Looks like I'll have to buy another copy!
I think you can ring up ms and explain why you need to reactivate it and it will be fine...

chris watton

Original Poster:

22,552 posts

291 months

Friday 10th August 2007
quotequote all
spants said:
chris watton said:
My only prob is my OEM Vista Ultimate, because I had already activated it when I tried it for a day on my works PC, before re-installing XP, it won't let me activate it again! Looks like I'll have to buy another copy!
I think you can ring up ms and explain why you need to reactivate it and it will be fine...
Thanks, I'll try that, my fault really for activating it before I tested it out on my other system!

spants

1,090 posts

258 months

Friday 10th August 2007
quotequote all
my other comment is to why you need a highspec pc under the tv smile

I did that and it was way too noisy ( all in a beautiful Stands Unique 390A case http://www.standsunique.com/productrange/digitalme... ).

I then ripped it all out and installed an xbox1 in the case running XMBC!.

However, after 2 years... the xmbc doesnt do all I want. I have a low power microATX coing out of my carpc and I'm thinking of putting that in the case.

Tony

chris watton

Original Poster:

22,552 posts

291 months

Friday 10th August 2007
quotequote all
spants said:
my other comment is to why you need a highspec pc under the tv smile

I did that and it was way too noisy ( all in a beautiful Stands Unique 390A case http://www.standsunique.com/productrange/digitalme... ).

I then ripped it all out and installed an xbox1 in the case running XMBC!.

However, after 2 years... the xmbc doesnt do all I want. I have a low power microATX coing out of my carpc and I'm thinking of putting that in the case.

Tony
Well, when we move to Italy next month, my gaming/work PC will be going into the premises where I will be working, leaving the HTPC my only gaming PC. Now, the HTPC was no slouch before (GF7950), but I think the 8800GTX is better suited to games, not CAD rendering (which is mostly CPU, not GPU intensive), so I simply swapped the cards around.

Noise isn’t an issue at all, the CPU heatsink and 3 case fans are virtually silent, and the 120mm fan on the PSU is also silent – this leaves the GTX, which, again, isn’t too noisy, in fact, we haven’t heard it! I am sure the SKY+ box is noisier!

I don’t think anyone should stand for noisy PC’s anymore, especially with the new C2D CPU’s running a lot more efficiently than the older P4s, and AMD’s.

And why such a high spec PC under the TV? I can play Rome/Medieval TW 2 on a 50” screen with highest settings, S.T.A.L.K.E.R., HL2, Oblivion, GTR2, TDU, Silent Hunter 4 etc – and Crysis, Bioshock and ME2 Kingdoms are all imminent too!

I also have over 20GB of music files (my whole CD collection) on the PC, as well and pictures, films etc, which is hooked up to the HT sound system.

Finally, I know that buying this kind of PC stuff is more expensive in Italy, so I thought I’d sort it all out now.

ETA, I now have a MATX mobo fitted with an AMD 4600+ and Zalman flower heatsink going spare...


Edited by chris watton on Friday 10th August 13:35

spants

1,090 posts

258 months

Friday 10th August 2007
quotequote all
ok, understand if it your only pc... My xbmc is used for dvd, dvix and streaming my music collection from my server rather than for games.


rsv gone!

11,288 posts

272 months

Friday 10th August 2007
quotequote all
chris watton said:
ETA, I now have a MATX mobo fitted with an AMD 4600+ and Zalman flower heatsink going spare...
s939? How much?

chris watton

Original Poster:

22,552 posts

291 months

Friday 10th August 2007
quotequote all
rsv gone! said:
chris watton said:
ETA, I now have a MATX mobo fitted with an AMD 4600+ and Zalman flower heatsink going spare...
s939? How much?
£40 the lot (mobo/CPU and heatsink) The mobo is quite new, got it a couple of months ago (well, May time)

Road2Ruin

6,579 posts

247 months

Saturday 11th August 2007
quotequote all
chris watton said:
Don’t know why I’m posting this, but I feel a little ‘chuffed’ with myself! I have managed to ‘shoehorn’ a new ATX Gigabite P35 mobo with 2 GB of memory, a new 2.66 MHz E6750 C2D, a 8800GTX, a 500 and 250GB HDD, and a SATA DVD drive into a small SilverStone HTPC case! The internals did require a LOT of hacking and slashing with the hacksaw, though!

Have had it running all day with benchmarks, and has been fine (Vista Ultimate, and a 5.6 score on Vista performance!), the new C2D 6750 runs very cool compared to the AMD 4600 it replaced.

So, if you want a powerful HTPC to sit under the TV, it can be done!
When the buzzing of all those fans finally gets to you and sounds like a mosquito playing a paper and comb combo then you will wish you had gone for a less powerful system, particularly the gpu, silence is golden.