mobo dead after updating BIOS!
Author
Discussion

chris watton

Original Poster:

22,552 posts

291 months

Wednesday 22nd August 2007
quotequote all
I should have known better! Today, I flashed the BIOS on my Asus Striker Extreme mobo, using Asus Update, and now it will not boot past the logo when first switched on! I can press TAB to get rid of the logo, and press DEL to get a ‘Entering setup’ text on the screen, but that’s it, it just hangs! I have cleared the BIOS with the jumpers, changed the battery and gone through all the processes of elimination possible.
I can only conclude that the BIOS flash has ruined my mobo.

I guess there are no ways around this, I can’t even enter the BIOS options!

If only I left it well alone! ..And just got an email from employers saying that I have some urgent work to do! banghead

My fault for 'fiddling!

That Daddy

19,466 posts

252 months

Wednesday 22nd August 2007
quotequote all
is the Bios chip soldered or does it go into a socket on your Asus?

chris watton

Original Poster:

22,552 posts

291 months

Wednesday 22nd August 2007
quotequote all
That Daddy said:
is the Bios chip soldered or does it go into a socket on your Asus?
I think it sits in a socket.

TheLearner

6,962 posts

266 months

Wednesday 22nd August 2007
quotequote all
chris watton said:
That Daddy said:
is the Bios chip soldered or does it go into a socket on your Asus?
I think it sits in a socket.
He's about to tell you one of two things. Either a) buy an identical unit that's somehow dead and pull the BIOS chip from it or b) perform some sort of hot swap using the identical unit's BIOS, basically boot, pop it out, drop the dead one in and reflash.

Basically, that can work. However, you're computer is now a boat anchor. If whoever supplied the machine wipe their hands of it then... its time for a new computer (or mobo).

This is why flashing the BIOS of anything be it a mobo, GFX card and indeed high end SCSI controllers is considered the last act of desperation because if it screws up... bricked.

That Daddy

19,466 posts

252 months

Wednesday 22nd August 2007
quotequote all
Do you know any one with the same mainboard you can borrow the Bios chip?or failing this you can get replacement Bios chips from certain outlets(google is your friend) or the manafacturer(you have a up to date mainboard so cant see this being a problem),or you can do as i once did on a failed bios flash,fit good bios chip boot up system into windows then remove Bios chip(dont turn off pc)then fit corrupt bios chip,do a search for a utility that allows you to flash the Bios in windows,hey presto,how do i know it works cos i have done it already,BEWAREeek it is Very riskynuts,i had the proper bios chip removal tool,and the system i done it on is the one i am typing on,MSI Platinum 7025 company workstation,i think the previous suggestions are far far safer.

chris watton

Original Poster:

22,552 posts

291 months

Wednesday 22nd August 2007
quotequote all
Have ordered a £60 mobo to get me out of trouble - I have used Asus update a lot in the past with various Asus mobos, without a hitch. The one motherboard that shouldn't cock it up is the £200+ (when I bought it) Striker Extreme!

It never was quite right, thinking about it; if I turned it off at the power switch, when it re-booted when switched back on, it would lose all of my BIOS setting (A PITA when it's set in RAID0 config!), even after changing the battery!

I don't think I'll ever waste money on such expensive mobo's again - or flash the BIOS! lol

chris watton

Original Poster:

22,552 posts

291 months

Wednesday 22nd August 2007
quotequote all
That Daddy said:
Do you know any one with the same mainboard you can borrow the Bios chip?or failing this you can get replacement Bios chips from certain outlets(google is your friend) or the manafacturer(you have a up to date mainboard so cant see this being a problem),or you can do as i once did on a failed bios flash,fit good bios chip boot up system into windows then remove Bios chip(dont turn off pc)then fit corrupt bios chip,do a search for a utility that allows you to flash the Bios in windows,hey presto,how do i know it works cos i have done it already,BEWAREeek it is Very riskynuts,i had the proper bios chip removal tool,and the system i done it on is the one i am typing on,MSI Platinum 7025 company workstation,i think the previous suggestions are far far safer.
Excellent advice, thank you smile

I suspect the BIOS chip was/has been always faulty, thinking about it. I may just see what I can do under the warranty - but I need a new mobo ASAP, as it's my work PC (am using HTPC to type this, but my CAD programs don't work properly with Vista!)
I shall do do a google, but I can't see many stupid enough to spend so much on a mobo, like I did.

TheLearner

6,962 posts

266 months

Wednesday 22nd August 2007
quotequote all
chris watton said:
It never was quite right, thinking about it; if I turned it off at the power switch, when it re-booted when switched back on, it would lose all of my BIOS setting (A PITA when it's set in RAID0 config!), even after changing the battery!
FUBAR board. Hindsight is always 20/20, but sounds like it wasn't getting power from the battery, so either duff battery holder, duff tracks on the board or duff CMOS chip.

Might be worth e-mailing them, if it's never been right and finally keeled over... they might offer to repair it.


sadako

7,080 posts

269 months

Wednesday 22nd August 2007
quotequote all
There are places on the net like badflash.com (assuming he's still there) that will reflash your bios chip for you if you remove it and post it to them.

That Daddy

19,466 posts

252 months

Wednesday 22nd August 2007
quotequote all
sadako said:
There are places on the net like badflash.com (assuming he's still there) that will reflash your bios chip for you if you remove it and post it to them.
Thats them,failing that RMA that board.

chris watton

Original Poster:

22,552 posts

291 months

Wednesday 22nd August 2007
quotequote all
Thanks for the advice guys (and girls wink), I have submitted a form to Asus UK, stating the problems, hopefully, it should get resovled. In the meantime, I have to wait for my 'cheapo' mobo to arrive, which means having to re-install XP and all my programs again before I can even start work!

I don't think I'll set up my 2x150 Raptors in RAID0 for now, too, when I put it all back together, as performance difference is miniscule, if any, in the real world.

jimmyjimjim

8,352 posts

269 months

Wednesday 22nd August 2007
quotequote all
TheLearner said:
Ooooh, someone's working towards not being a passenger anymore!

TheLearner

6,962 posts

266 months

Wednesday 22nd August 2007
quotequote all
jimmyjimjim said:
TheLearner said:
Ooooh, someone's working towards not being a passenger anymore!
Me + Corsa + Instructor. It's going to be a blood bath but meh biggrin

sp60

524 posts

290 months

Thursday 23rd August 2007
quotequote all
TheLearner said:
This is why flashing the BIOS of anything be it a mobo, GFX card and indeed high end SCSI controllers is considered the last act of desperation because if it screws up... bricked.
Don't agree with this. Any product with updateable firmware should be kept up to date and should update without dying. Some companies will not provide support for their products if they are not patched to the latest firmware release.
I do agree that if there is no need to update, then it shouldn't be done, but generally speaking new firmware isn't released unless there is a good reason for it.
Avoiding firmware updates is a bit like refusing to reboot a server in case something goes wrong. It's better to do these things in a controlled way rather than waiting until there is a problem, then trying to fix it in a very small time frame, usually under a lot of pressure!

TheLearner

6,962 posts

266 months

Thursday 23rd August 2007
quotequote all
sp60 said:
TheLearner said:
This is why flashing the BIOS of anything be it a mobo, GFX card and indeed high end SCSI controllers is considered the last act of desperation because if it screws up... bricked.
Avoiding firmware updates is a bit like refusing to reboot a server in case something goes wrong. It's better to do these things in a controlled way rather than waiting until there is a problem, then trying to fix it in a very small time frame, usually under a lot of pressure!
<unix hat on>Reboot a server? Why on earth would you want to reboot a server??? <unix hat off>

By controlled I assume you mean a piece of paper marked 'change request' that's been approved by everyone and someone drafted in to do it who's a special flasher? Opps. Bricked SCSI card. Bricked WinTel box... opps. That's with the correct vendor BIOS's and correct vendor tools and performed by a vendors engineer.
Any vendor who wants a specific revision of firmware is more than welcome to come and perform a change, that's what all the cash it paid to them for.

Running around a server farm like some demented flashing fairy will get you a swift kick in the happy sacks. Especially when I have to go around unbricking all the bits of kit that have mysteriously developed faults with the "latest vendor supplied firmware". Last. Act. Of. The. Desperate. and "If it ain't broke stop fiddling with it!"

davidd

6,720 posts

315 months

Thursday 23rd August 2007
quotequote all
[quote=TheLearner"If it ain't broke stop fiddling with it!"
[/quote]

Te issue with most firmware updates is that the fix a small problem which is only applicable to a very few installations. Some don't realise that there is not point applying the upgrade...

which reminds me I have not checked dell to see if I need to reflash my laptop..

Back later (maybe much later).

D

sp60

524 posts

290 months

Thursday 23rd August 2007
quotequote all
TheLearner said:
sp60 said:
TheLearner said:
This is why flashing the BIOS of anything be it a mobo, GFX card and indeed high end SCSI controllers is considered the last act of desperation because if it screws up... bricked.
Avoiding firmware updates is a bit like refusing to reboot a server in case something goes wrong. It's better to do these things in a controlled way rather than waiting until there is a problem, then trying to fix it in a very small time frame, usually under a lot of pressure!
<unix hat on>Reboot a server? Why on earth would you want to reboot a server??? <unix hat off>

By controlled I assume you mean a piece of paper marked 'change request' that's been approved by everyone and someone drafted in to do it who's a special flasher? Opps. Bricked SCSI card. Bricked WinTel box... opps. That's with the correct vendor BIOS's and correct vendor tools and performed by a vendors engineer.
Any vendor who wants a specific revision of firmware is more than welcome to come and perform a change, that's what all the cash it paid to them for.

Running around a server farm like some demented flashing fairy will get you a swift kick in the happy sacks. Especially when I have to go around unbricking all the bits of kit that have mysteriously developed faults with the "latest vendor supplied firmware". Last. Act. Of. The. Desperate. and "If it ain't broke stop fiddling with it!"
No, by controlled I mean knowing that the patch is worth applying, knowing that there is enough time to apply it. Knowing the procedures and tools required to apply the patch and knowing that I have a backup plan in case the piece of kit in question gets fubarred. We don't have the 'luxury' of expensive vendor support, so it's all down to us to get it right, which, to be honest, I think is a nicer situation. Also a significant factor to the differing approaches is the fact that we only have 20 odd servers, so a lot less to deal with than it sounds like you have!
I may, however, run round the building like a demented fairy, just cos it sounds quite entertaining wink

Road2Ruin

6,580 posts

247 months

Thursday 23rd August 2007
quotequote all
Dont Asus have a bios recovery tool on the CD? I seem to recall rom my asus board that if you somehow!!!! screwed up the bios all you had to do was bung the asus cd in and it would do something (maybe). Anyway, might be worth looking into.

chris watton

Original Poster:

22,552 posts

291 months

Thursday 23rd August 2007
quotequote all
Road2Ruin said:
Dont Asus have a bios recovery tool on the CD? I seem to recall rom my asus board that if you somehow!!!! screwed up the bios all you had to do was bung the asus cd in and it would do something (maybe). Anyway, might be worth looking into.
Yes, but the problem is that the actual BIOS chip seems to be dead, negating any form of recovery. I couldn't even get into the BIOS menu, I press DEL, text would appear saying 'entering setup', and there it hangs, forever. I feel sick that I spent so much on that mobo, only to get a dud.

ajg31

1,455 posts

238 months

Thursday 23rd August 2007
quotequote all
Scares me every time i upgrade the Bios. After "living" with my DFI expert (3 in fact, none stable) i realised i really didnt need bleeding edge stuff. So happy i didnt. the odd FPS i can live without smile