alloy indicator stalks

[sapper]

Anyone got any idea where I can get hold of a set of Zertec indicator stalks

[Zippee]

sapper said:

Anyone got any idea where I can get hold of a set of Zertec indicator stalks

Unfortunately you won't get them new, you could try Bell Hill - they had a 2nd hand pair inc column adjuster for about £55.
I found mine on E-bay after months of looking and paid £36, albeit for stalks only.
They do look a hundred times better than the bullet shaped ones from Leven.

[tucker20]

What do those bad boys look like?? I've got the Leven ones.

[Elwood]

These seem quite reasonable www.allytat.com/product_info.php?products_id=198

[PD_400]

Elwood said:

These seem quite reasonable www.allytat.com/product_info.php?products_id=198

These are the ones I've got, really easy to fit, and arrived quickly.
The matching handbrake lever wasn't the right fit for my car though. I was gradually filing the handbrake and the inside of the handbrake lever but I think I've pretty much given up now.

[AntonyJ]

Zippee said:

sapper said:

Anyone got any idea where I can get hold of a set of Zertec indicator stalks

Unfortunately you won't get them new, you could try Bell Hill - they had a 2nd hand pair inc column adjuster for about £55.
I found mine on E-bay after months of looking and paid £36, albeit for stalks only.
They do look a hundred times better than the bullet shaped ones from Leven.

A pair went on fleabay last week for £26 , couldnt believe it! And I was in Greece!!! so missed them.

[miniman]

The Leven ones might be comparatively expensive but they are really superb quality.

ETA - looking at those "allytat" ones above, they don't have the neat design that the Leven ones do that fits perfectly with the existing rubber boots.

Edited by miniman on Wednesday 5th September 17:04

[Zippee]

miniman said:

The Leven ones might be comparatively expensive but they are really superb quality.

I don't doubt that. Personally though I just don't like the shape of them.

[AntonyJ]

The Zertec ones are the nicest shape.

Maybe leven ought to see if they can produce them under licence from Clive.

[Peter66]

I also had problems fitting the Allytat handbrake cover to my Griif. It turned out that the front of the brake is circular and at the back it becomes tapered and therefore bigger in diameter! I used a small electrical drill type of tool to file the back of the cover a few mm's bigger. You only need to do this at the bottom and top part of the back of the cover. Fits nicely now!

Peter

[Slacey]

AntonyJ said:

The Zertec ones are the nicest shape.

Maybe leven ought to see if they can produce them under licence from Clive.

Ant, are the ones on my car Zertec jobbies? Look like paddles?

[sapper]

Slacey said:

AntonyJ said:

The Zertec ones are the nicest shape.

Maybe leven ought to see if they can produce them under licence from Clive.

Ant, are the ones on my car Zertec jobbies? Look like paddles?

Yes they look like paddles, Thats the ones im trying to find.

[sapper]

Zippee said:

sapper said:

Anyone got any idea where I can get hold of a set of Zertec indicator stalks

Unfortunately you won't get them new, you could try Bell Hill - they had a 2nd hand pair inc column adjuster for about £55.
I found mine on E-bay after months of looking and paid £36, albeit for stalks only.
They do look a hundred times better than the bullet shaped ones from Leven.

Tried Bell Hill, they have nothing looks like ill have to keep an eye on e-bay unless anyone has any other ideas

[AntonyJ]

Slacey said:

Ant, are the ones on my car Zertec jobbies? Look like paddles?

Yeh, those are the ones , bit tatty arent they ,dont really suit red cars.

Tell you what, I'll swap you for the standard ones, from the bottom of my heart kinda...

[Slacey]

AntonyJ said:

Yeh, those are the ones , bit tatty arent they ,dont really suit red cars.

Tell you what, I'll swap you for the standard ones, from the bottom of my heart kinda...

That's sooooo kind of you! I'll let you know in due time...

[Clive Reed]

Hello everyone,

Merry Christmas 2007

The stalks are back in production using the original tooling and will be available soon from [e-mail] if anyone is interested.

Happy New Year too!

Best regards,
Clive

[dogbucket]

Have you got any pictures Clive, just out of interest?

Although I believe Santa is bringing me some allytat ones hopefully.

[Clive Reed]

They are identical to the ones I designed 10 years ago. I'll email you a picture when the site allows me to.

[spend]

Does this mean Russell will also be able to reproduce the afterburners by any chance?

Dave

[Clive Reed]

We will put most things back into production over time so yes, the tail light conversions will become available again.

I am remaining in Singapore for the immediate future hence Russell's involvement in the UK. I have been busy on some other projects recently:
http://www.ferrarichat.com/forum/showthread.php?t=...
I don't know if you will be able to see the images in the thread but if not check out the image in my profile.