Discussion
Welcome to the badly designed fuel filler system on TVR`s
It will fill if you are careful and slow, but stand back!!
It is due to having a poor or non existant fuel breather system which air locks during filling.
It can be modified but is costly as the tank has to be removed and re engineered.
Cheers
Roy
It will fill if you are careful and slow, but stand back!!
It is due to having a poor or non existant fuel breather system which air locks during filling.
It can be modified but is costly as the tank has to be removed and re engineered.
Cheers
Roy
Is the filler on a chim different to a grif ? On the chim I place the nozzle into the filler with the handle facing into the boot, then some gentle wiggling will see it drop down to the hilt. Then fill up as normal. Sometimes it takes a few sconds of wiggling to seat it properly but it will go all the way.
Just re-read this and It sounds quite dirty....
Just re-read this and It sounds quite dirty....
LordGrover said:
Just for a bit of balance - I'm not bragging - but I don't get this. Fills up fine with no wiggling, jiggling or anything.
You may just be lucky LG in that the Fuel pumps you use have lowish flow rates - they do seem to vary a lot
I even find some that click off on the Trusty Disco! The other thing may be the venting, CC blocked or near its half life, partially trapped vent pipe...Dave
Gassing Station | Griffith | Top of Page | What's New | My Stuff


