Glove Box Lid Removal ?

[gary_de_tam]

Hi,

Anyone know if this is a novises job as I want to
try and get it straightened out. TVR cannot currently
offer the replacement material so gonna try a indie
somewhere....

I believe it is the plastic type as I have a '04 tam
and apparently the later lids used a fibre glass material...

TIA, gt.

[YI8TVR]

If its the same as the t350, undo the two little black screws on the top at each side and the whole glove box will slide out with the lid if you pull it forward and up at the same time. Dont be afraid to get a bit heavy handed.

[Mr John]

If you do find an alternative I would also be interested.

[David Godfrey]

Did you managed to remove and fix it?

[gary_de_tam]

No, i have not gotten round to trying it yet...

[Toobin]

YI8TVR said:

If its the same as the t350, undo the two little black screws on the top at each side and the whole glove box will slide out with the lid if you pull it forward and up at the same time. Dont be afraid to get a bit heavy handed.

I dont suppose this leads to a staying shut and flid itting the hole fix?

[gary_de_tam]

Once i do get the lid off, god know's how i get it straightend!