996 C4S Front Bumper removal

[audi321]

I've gone and scratched my front bumper and along with some stone chips I have decided to get it fully resprayed.

To save some money on labour I thought I'd have a go at removing the bumper myself and letting the spray shop just do the paintwork.

Trouble is, I can't see how to get the damn thing off! I've removed quite a few screws from underneath, but can't see any others and it's still firmly attached.

Anyone got an idiots guide on how to do this?

Thanks for any help!

[BLKROKT]

Remove the side markers, there are 2 screws in there.
Remove the trim around the boot latch, there are 4 screws there.
Should slide right off now.

[thong]

remove side repaters one screw each side,you will see another screw in there facing up,pull the front part of the wheel liner down to acess these,one each side,remove trim bonnet latch, 4 plastic screws turn 90 degrees,under there 4 screws,remove screws and clips underside,there ya go.

[scoobyc]

these 2 are pretty good for more detail (eg pics, one of the screws is a pita without removing the inner arch liners )
http://www.realtime.net/~rentner/Porsche/Radiator/...
http://www.porscheclubgbforum.com/tm.asp?m=311840