993 varioram bhp
Author
Discussion

smilyduck

Original Poster:

140 posts

236 months

Wednesday 3rd October 2007
quotequote all
The 993 Varioram is that 285 bhp at the flywheel or at the wheels?

Thanks

Slippydiff

16,496 posts

254 months

Wednesday 3rd October 2007
quotequote all
Flywheel.

neilski

2,563 posts

266 months

Wednesday 3rd October 2007
quotequote all
Normally flywheel unless you add blue LED washer jets and Lexarse back lights then you get at least 285 at the wheels. wink

997GT3

3,139 posts

245 months

Thursday 4th October 2007
quotequote all
Has anyone ever had a bog standard varioram 993 on a dyno to see if 285bhp was produced?

thegoose

8,077 posts

241 months

Thursday 4th October 2007
quotequote all
Porsches have a tendency to produce at least the specified output, so if evrything is working correctly expect closer to 300bhp.

When racing we have to have standard engines (in every respect) but there is a 5% tolerance added for an absolute 'legal' limit. Most cars tested are just within this upper limit. I had mine tested before the start of the season, should be 204bhp = 150kW. It came in around 158.5kW so the timing was adjusted to get it within limits 156.5kW. The engine was built at the start of the previous year so was not too fresh, nor too worn. It got taken for power testing after Silverstone (Britacr weekend) and was found to be 154.5kW, although the figure pre-loss-adjustment was almost identical to the start of the season so even after a long season (16 races up to that point) it was still producing pretty much the same as at the start.

kennyboy

641 posts

270 months

Friday 5th October 2007
quotequote all
997GT3 said:
Has anyone ever had a bog standard varioram 993 on a dyno to see if 285bhp was produced?
I've had 3 seperate vram 993's on the dyno - all 3 produced within 3bhp of 285.

All were between 45k and 60k miles.

clubsport

7,420 posts

289 months

Friday 5th October 2007
quotequote all
Agree close to 285 is the norm on a vram, don't know where this idea of 300bhp comes from on standard spec car,,,993's are not known for being excessive with their bhp.
There are a couple of v/ram rubber connections that collapse with age in the system, these are likely to have a negative effect on the torque curve,,,cost literally a few £ to source parts from OPC.