997GT3 - geometry setup experiences
997GT3 - geometry setup experiences
Author
Discussion

willr

Original Poster:

363 posts

284 months

Monday 8th October 2007
quotequote all
Who has had their 997 GT3 geometry adjusted from standard?
Was it just an adjustment, or include new parts?

How pleased have you been with the results, on both road + track?

I'm thinking of getting a setup soon and would like to hear your experiences!

ScottL

814 posts

261 months

Monday 8th October 2007
quotequote all
willr said:
Who has had their 997 GT3 geometry adjusted from standard? Was it just an adjustment, or include new parts? How pleased have you been with the results, on both road + track? I'm thinking of getting a setup soon and would like to hear your experiences!
I just had a trackday setup done by JZ Machtech on my RS.

The setup is along the lines suggested in the drivers handbook - eg increased negative camber front and rear, increased rear toe and corner weighting. The only parts required are a pair of shims for the front struts to give the desired increase in camber.

The car is still lovely to drive on the road although not quite as rock steady in a straight line as standard. On track the car is more composed, less understeer and excellent stability when braking hard. Also tyres will wear evenly now.

Cost was around £500 and it takes pretty much a full day. If you plan to track I would certainly recommend as the improvement is significant.

Geneve

4,020 posts

250 months

Monday 8th October 2007
quotequote all
They arrive from the factory with a 'default' set up. I believe the OPC can adjust this to 'race' or 'road', although this may be no more than a rear arb setting.

By now, the specialists, such as Steve at JZM, must have some experience with the 997GT3s and they should be best to advise you.

ChesterDog

329 posts

296 months

Monday 8th October 2007
quotequote all
I don't concur with the 'they understeer a lot from the factory' bit that everyone seems to say - mine doesn't, it's got really keen bite at the front end. Understeers on track when it's wet (though not hugely even then), but in the dry it simply doesn't.

willr

Original Poster:

363 posts

284 months

Tuesday 9th October 2007
quotequote all
ScottL said:
The setup is along the lines suggested in the drivers handbook - eg increased negative camber front and rear, increased rear toe and corner weighting. The only parts required are a pair of shims for the front struts to give the desired increase in camber.
Does the shimming mean that you've got more camber than can be accomodated with standard suspension adjustment? Or was there some other reason for it?
What camber have you got front and rear?

ScottL

814 posts

261 months

Tuesday 9th October 2007
quotequote all
willr said:
Does the shimming mean that you've got more camber than can be accomodated with standard suspension adjustment? Or was there some other reason for it?
What camber have you got front and rear?
Here is quote from Porsche's tech guide to the 997GT3 which explains how the front axle is designed and adjusted...

In order to obtain precision attachment of dampers and piston rods so as to minimise effects on axle kinematics during compression, the supporting mounts are provided with a Unibal joint, as on the 911 GT3 (996). The supporting mount is designed for two possible mounting positions so that different camber ranges can be set for road or racing tyres with very little effort.

As on the 911 GT3 (996), fine camber adjustment is carried out by adjusting shims on the lower split wishbone. This method of adjustment at the wishbone has the advantage that a small increase in track width is also obtained with the larger camber. In order to ensure optimum axial geometry at all times despite
this broad camber adjustment range, the wishbone incorporates two attachment points for the trailing links.

The car comes as standard with 1 degree on the front and 2 degrees on the rear. 2.5 to 3 degrees all round is more suited to use on track for the reasons stated previously.

KnickeRS

42 posts

230 months

Tuesday 9th October 2007
quotequote all
It is also worth adding to Scotts reply that the JZ settings have been developed by "Manthey" through exhaustive testing and we "owners" are benefitting from the "piggy-backing" of this experience.

My own car 997GT3RS felt utterly stable and solid until the point that it reached break-away and then it just went ! After a JZM Geo, the car was transformed. Yes it felt more "edgey", but also more alert. I have used it on several other track days since and the difference is night and day to the standard set-up without any worrying moments since.

It is also worth mentioning that the Pirelli shod cars all have a better resilience to understeer with the Michelin shod cars seeming to have better rear end grip. This was the opinion of a few of us after the Autotrack Spa trip in July.

I would suggest that for pure road useage, the car is left as-is, otherwise get a geo. The usual suspects are all very capable of setting the cars up correctly, but my preference has to be JZM.

Nick

KnickeRS

42 posts

230 months

Tuesday 9th October 2007
quotequote all
It is also worth adding to Scotts reply that the JZ settings have been developed by "Manthey" through exhaustive testing and we "owners" are benefitting from the "piggy-backing" of this experience.

My own car 997GT3RS felt utterly stable and solid until the point that it reached break-away and then it just went ! After a JZM Geo, the car was transformed. Yes it felt more "edgey", but also more alert. I have used it on several other track days since and the difference is night and day to the standard set-up without any worrying moments since.

It is also worth mentioning that the Pirelli shod cars all have a better resilience to understeer with the Michelin shod cars seeming to have better rear end grip. This was the opinion of a few of us after the Autotrack Spa trip in July.

I would suggest that for pure road useage, the car is left as-is, otherwise get a geo. The usual suspects are all very capable of setting the cars up correctly, but my preference has to be JZM.

Nick

Steve Rance

5,453 posts

262 months

Tuesday 9th October 2007
quotequote all
Geometry will help but with active you will always be working against the loaded damper when you want the car to turn in. It wont let the car dig in. It will feel like the roll bar is too stiff.


willr

Original Poster:

363 posts

284 months

Tuesday 9th October 2007
quotequote all
Thanks for the replies so far, but this has mainly been from RS owners. What experiences have cooking 997 GT3 owners had?

I assume the GT3 and RS benefit from slightly different setups.

Diamond blue

3,288 posts

231 months

Wednesday 10th October 2007
quotequote all
well,
Unlike the 996 Gt3/Rs the suspension set up on both the GT3 and the RS is essentially the same this time. The RS has some changes at the rear I think and a wheel base about 5mm greater.
I had mine done last week and so far only have road experience to gauge the change. Seems to have improved turn in and a little less straight line stability.I personally prefer the feel and balance to stock.
The real likely benefits are going to be on a track though so we'll see soon.