993 jumpy at low RPM
993 jumpy at low RPM
Author
Discussion

Family Guy

Original Poster:

802 posts

239 months

Thursday 11th October 2007
quotequote all
I have noticed over the last month or two that my 993 has developed a judder at low RPM. It's a bit like changing into the wrong gear, say going into 5th instead of 3rd. This only happens at low RPM around 1200 or thereabouts like when i'm trying to drive through a built up are slowly. It's more noticeable when slowing down or trying to keep a constant slow speed but as soon as you press the accelerator it pick's up fine. Also the idle is fine and she pulls like a train.

I've read a bit about the MAF sensor but this seams to cause problems at higher RPM, or am i incorrect??

Any ideas what can be causing this as i'm starting to get a worried that i might be causing damage by leaving it?

Any advice is appreciated,

FG

giw12

1,465 posts

294 months

Thursday 11th October 2007
quotequote all
Is the air con on?? Being serious btw....

Family Guy

Original Poster:

802 posts

239 months

Thursday 11th October 2007
quotequote all
giw12 said:
Is the air con on?? Being serious btw....
Non air con model. But i know what you mean. Had a volvo that was crap with the Air Con running.

Edited by Family Guy on Thursday 11th October 09:36

USS Bozeman

1,084 posts

253 months

Thursday 11th October 2007
quotequote all
No the Maf can cause low speed roughness / juddering. In fact I think thats usually the case.
Can't comment on the 993, but a new MAF sorted out my 996TT, it was lumpy at low revs and when when accelerating, esp in second gear, it felt rough, not smooth.

phelix

4,684 posts

280 months

Thursday 11th October 2007
quotequote all
Is it during the transition from closed throttle to small throttle openings and back again? Might be worth checking the throttle position sensor. About £90 from Porsche or £40 from your friendly Vauxhall specialist. Same Bosch/Hella part!

993AL

1,939 posts

249 months

Thursday 11th October 2007
quotequote all
Could also be the HT leads breaking down under load, have had this with the 993 and other cars.

abarber

1,713 posts

272 months

Thursday 11th October 2007
quotequote all
Try cleaning the idle control valve. It's easy to do and should cure it. Details on the p-car diy. Made a big difference to mine.

Cheers.

Pickled Piper

6,452 posts

266 months

Thursday 11th October 2007
quotequote all
I'd try the cheap options first like distributor cap and rotor arms. clean the ISV then perhaps get the car plugged into a diagnostic tester (Bosch Hammer)to see if it has logged a fault.

pp

fido

18,932 posts

286 months

Thursday 11th October 2007
quotequote all
993AL said:
Could also be the HT leads breaking down under load, have had this with the 993 and other cars.
i had simlar symptoms with my 968, and it was the HT lead (& dirty plugs) - all changed and it's now much smoother at low revs.

giw12

1,465 posts

294 months

Thursday 11th October 2007
quotequote all
abarber said:
Try cleaning the idle control valve. It's easy to do and should cure it. Details on the p-car diy. Made a big difference to mine.

Cheers.
Is that the same thing as the Idle Stabiliser Valve??

Family Guy

Original Poster:

802 posts

239 months

Thursday 11th October 2007
quotequote all
Thanks for all the info thumbup

Looks like i have some tinkering to do this weekend.