Discussion
The non-standard immobiliser fob is playing up on my 993. I've taken it apart and probably made things worse. The previous owner didn't give me any info/paperwork so i'm not sure who i need to contact about getting it repaired or replaced.
On the fob itself it says "Getronic S.r.l". I've googled them and it seems to be a Spanish company.
Any help would be much a appreciated.
On the fob itself it says "Getronic S.r.l". I've googled them and it seems to be a Spanish company.
Any help would be much a appreciated.
Try Tech Tronics in Trafford Park, Manchester. They do copies of all types of remote fob, although be warned they usually copy a working original so may not be able to do yours. Worth a go though. If you're able to take it and the car there, they may get it working, then provide a new replacement. £35+VAT, a lot for a small blipper but they have the niche market and it's cheaper than the alternatives.
Ah, things haven't gone quite as well as i'd hoped.
The instuctions with the new fobs don't work for my car so I'm being told I need to send the two new fobs plus the entire immobiliser box to manchester to have them programmed. And it will cost £50 to do it too.
Now, as this means getting someone to remove the box, probably by taking out the seat and all manner of other things, this seems like a hell of an inconvenience just to get a new fob.
So, does anyone have any other ideas?
If it helps, it now looks like mine is a Porsche standard immobiliser on a 1995 993 C2. It doesn't have an extra receptacle so the remote locks the car and sets/unsets the immobiliser at the same time (unlike other Porsches I've owned that had an extra receptacle/stage to the process).
The instructions we've followed (but that didn't work) were to turn key in ignition, flip dipswitch 2 on immob. box to on, press and hold new remote until dash Led illuminates and then extinguishes.
We couldn't get the remote to get the Led to illuminate at all.
This is very frustrating!!
Please help....someone?....
The instuctions with the new fobs don't work for my car so I'm being told I need to send the two new fobs plus the entire immobiliser box to manchester to have them programmed. And it will cost £50 to do it too.
Now, as this means getting someone to remove the box, probably by taking out the seat and all manner of other things, this seems like a hell of an inconvenience just to get a new fob.
So, does anyone have any other ideas?
If it helps, it now looks like mine is a Porsche standard immobiliser on a 1995 993 C2. It doesn't have an extra receptacle so the remote locks the car and sets/unsets the immobiliser at the same time (unlike other Porsches I've owned that had an extra receptacle/stage to the process).
The instructions we've followed (but that didn't work) were to turn key in ignition, flip dipswitch 2 on immob. box to on, press and hold new remote until dash Led illuminates and then extinguishes.
We couldn't get the remote to get the Led to illuminate at all.
This is very frustrating!!
Please help....someone?....
Gassing Station | Porsche General | Top of Page | What's New | My Stuff



