Discussion
No Haynes, but you can download all the parts catalogues here - https://techinfo.porsche.com/techinfo/VFModuleManager?Type=GenuineParts
As mentioned above, Adrian Streather's book is also pretty good - http://www.amazon.co.uk/Porsche-911-Enthusiasts-Companion-1989-1994/dp/0837602939/ref=pd_bbs_sr_2/202-8081772-9862246?ie=UTF8&s=books&qid=1192829857&sr=8-2
out of stock, but they occasionally come up on ebay.
There is a printed workshop manual, but it's about £300 (7 volumes), and isn't really that good.
As mentioned above, Adrian Streather's book is also pretty good - http://www.amazon.co.uk/Porsche-911-Enthusiasts-Companion-1989-1994/dp/0837602939/ref=pd_bbs_sr_2/202-8081772-9862246?ie=UTF8&s=books&qid=1192829857&sr=8-2
out of stock, but they occasionally come up on ebay.
There is a printed workshop manual, but it's about £300 (7 volumes), and isn't really that good.
Bentley or Adrian Streather, both have their uses, or maybe Wayne Dempsey....older engine stuff, but still has it's uses. http://www.amazon.co.uk/Projects-Porsche-1964-1989...
Kevin.
Kevin.
I found this site a few weeks ago, ive downloaded them for my 996 and found them to be 100% complete set of the origianl OEM Porsche workshop manuals including part numbers (have a link for the part number catalogue as well if anyone needs it)
http://www.cannell.co.uk/
hope this is off help - better than the haynes manual ( have you noticed how they just keep getting thinner and thinner now ! )
Jon
http://www.cannell.co.uk/
hope this is off help - better than the haynes manual ( have you noticed how they just keep getting thinner and thinner now ! )
Jon
Just ask the questions on here mate.
As a starter you can delete the shims safely. But expect brakes to squeal. Then again it is a 964 and the caliper plates will probably have lifted so they will do that anyway!
Pads I always used spurious ones from my local motorfactors, never had fade, lasted as long as textar (Porsche original) and were spot on. Personal taste though and I will point out I'm not heavy on brakes.
Disks serbro are fine I used them and once fitted properly (a long story) were spot on and were still fine after 20K when I sold the car.
What do you want to know about suspension?
As a starter you can delete the shims safely. But expect brakes to squeal. Then again it is a 964 and the caliper plates will probably have lifted so they will do that anyway!
Pads I always used spurious ones from my local motorfactors, never had fade, lasted as long as textar (Porsche original) and were spot on. Personal taste though and I will point out I'm not heavy on brakes.
Disks serbro are fine I used them and once fitted properly (a long story) were spot on and were still fine after 20K when I sold the car.
What do you want to know about suspension?
wildoliver said:
Just ask the questions on here mate.
As a starter you can delete the shims safely. But expect brakes to squeal. Then again it is a 964 and the caliper plates will probably have lifted so they will do that anyway!
Pads I always used spurious ones from my local motorfactors, never had fade, lasted as long as textar (Porsche original) and were spot on. Personal taste though and I will point out I'm not heavy on brakes.
Disks serbro are fine I used them and once fitted properly (a long story) were spot on and were still fine after 20K when I sold the car.
What do you want to know about suspension?
Thanks,As a starter you can delete the shims safely. But expect brakes to squeal. Then again it is a 964 and the caliper plates will probably have lifted so they will do that anyway!
Pads I always used spurious ones from my local motorfactors, never had fade, lasted as long as textar (Porsche original) and were spot on. Personal taste though and I will point out I'm not heavy on brakes.
Disks serbro are fine I used them and once fitted properly (a long story) were spot on and were still fine after 20K when I sold the car.
What do you want to know about suspension?
Susp, going from saggy std to low and stiff billy HD and H&R....if I reckon I have the room up the drive. Peeps on here and Rennlist have given me loads of links, so I'll DIY!!
Before and after pics to follow.
Lucky
Jon_Bentley said:
I found this site a few weeks ago, ive downloaded them for my 996 and found them to be 100% complete set of the origianl OEM Porsche workshop manuals including part numbers (have a link for the part number catalogue as well if anyone needs it)
http://www.cannell.co.uk/
hope this is off help - better than the haynes manual ( have you noticed how they just keep getting thinner and thinner now ! )
Jon
wowee! great resource, but no 964 manual - anybody know where you can download this?http://www.cannell.co.uk/
hope this is off help - better than the haynes manual ( have you noticed how they just keep getting thinner and thinner now ! )
Jon
cheers, A.
Gassing Station | Porsche General | Top of Page | What's New | My Stuff






I think it's overpriced, oversized, suffers from duplication and nowhere near as usefull or comprehensive as the W/shop manual CD.. from £5 on eBay.
Mind you, I wish I had though of it first !!