Cold air vent packed in
Discussion
On mine the hot air blower is in the passenger footwell, on the outside edge. The cold air blower and air con unit is in a similar position in the drivers footwell. Remove the panel next to the accelerator pedal and you should find it.
Both of these blow into a mixer box that sits somewhere behind where the stereo normally is. Large 'flap' valves are meant to open only when the blower is running, but as most will have discovered, wind pressure above a certain speed will open them too.
Hence warm air blowing around in the summer and cold in the winter. There is a mod which I've done to make the warm air side of things recirculating.
For the cold side, I've got a spongy rubber ball that I stuff into the air inlet just underneath the drivers side indicator at the front. Goes in in October, comes out, oh, mainly june with our weather
Both of these blow into a mixer box that sits somewhere behind where the stereo normally is. Large 'flap' valves are meant to open only when the blower is running, but as most will have discovered, wind pressure above a certain speed will open them too.
Hence warm air blowing around in the summer and cold in the winter. There is a mod which I've done to make the warm air side of things recirculating.
For the cold side, I've got a spongy rubber ball that I stuff into the air inlet just underneath the drivers side indicator at the front. Goes in in October, comes out, oh, mainly june with our weather

Gassing Station | Cerbera | Top of Page | What's New | My Stuff



