help! 996 seatbelt area rattle driving me nuts (more?)
Discussion
After chasing a rattle that was in the rear drivers side i've finally managed to find the source but i'm stuck as to what to do to try to fix it! It originally looked/sounded like it was the belt's tensioner arrangement but after much playing its the actual support/body structure that the rattles coming from. (see below ) Has anybody had anything similair or any ideas how to fix it? I've tried silicon spray between the sections to no avail, but it seems like its vibrating between 2 of the metal sections (dodgy weld?). Any useful hints much appreciated


know what you mean but its such a tiny gap from the part "i think" the noise is coming from. Its the piece with the slot and hole in it, which is actually two pieces of sheet metal sandwiched together and spot welded (you can see 5 of them in the pic) and i think one has either become dodgy or theres some sort of flew going on between the 2 bits.
Edited by scoobyc on Tuesday 23 October 20:50
having previously been involved in body in white manufacure, this type of assembly if it has accoustic or dynamic concerns can be improved by the use of deadening pads, example is jaguar doors which are all fitted with adhesive pads on the cavity to prevent similar rattles etc.
the pads are not disimilar to a sound deadening material you can buy from car hifi dealers cant remember the exact names ( somthing like dynomat) but the product does the same thing and is self adhesive and almost metalic on the one side. Try a coating on either side of the component and near any other similar faces. But do not compramise the function of this component in any way since it is related to the safety belt system, ensure that anything you do will not foul or prevent this component operation.
the component in question should be checked, if the spot welds are failing could this compramise the safety belt? as a precaution and to cover myself, if your in any doubt id recommend either replacing it or getting an experienced welder to puddle weld the component to make up for the poor spot welds. If it is just rattling along the edges then prehaps a sealant material - silicon would be fine injected into the cavity to prevent resonnance / rattles - use a new tube with a very fine nozzle to allow material to enter the gap between the two pieces of steel.
the pads are not disimilar to a sound deadening material you can buy from car hifi dealers cant remember the exact names ( somthing like dynomat) but the product does the same thing and is self adhesive and almost metalic on the one side. Try a coating on either side of the component and near any other similar faces. But do not compramise the function of this component in any way since it is related to the safety belt system, ensure that anything you do will not foul or prevent this component operation.
the component in question should be checked, if the spot welds are failing could this compramise the safety belt? as a precaution and to cover myself, if your in any doubt id recommend either replacing it or getting an experienced welder to puddle weld the component to make up for the poor spot welds. If it is just rattling along the edges then prehaps a sealant material - silicon would be fine injected into the cavity to prevent resonnance / rattles - use a new tube with a very fine nozzle to allow material to enter the gap between the two pieces of steel.
Id be very cautious about using it near the safety belt mechanism, incase if compramised the internal braking system even if it werent fitted at the time it was sprayed heat etc could allow it to enter in time and you never know when youll need them to work.
oh forgot to mention, have you hoovered the area out, overly simple i know but might be worth it, somthing as small as a little nut could be causing the problems and not visible, decent hoover down there - worth a try
oh forgot to mention, have you hoovered the area out, overly simple i know but might be worth it, somthing as small as a little nut could be causing the problems and not visible, decent hoover down there - worth a try
thanks for tips. First thing i did was hoovered it out so not that unfortunately! I've got some dynamat that i'll try next as hadn't thought of it. Already ready removed the belt and "fed" silicone grease into any spaces and let it dry but made no difference. Won't affect function of the belt as all the parts are away from the drum/cartridge and its not that part thats rattling. Thanks again, sc.
[quote=Wanta996(Gotta)]I have this exact same problem with my 996 C4S, previous owner said - You just get used to it.
[/quote]
mines got so bad now i hear it every trip at a minimum and depending on road surface can hear it clearly over radio and cd. Unfortunately my opc is a 2 day trip or it would be there problem!
[/quote]
mines got so bad now i hear it every trip at a minimum and depending on road surface can hear it clearly over radio and cd. Unfortunately my opc is a 2 day trip or it would be there problem!
The creak is almost constant,(having had an Elise, doesnt bother me that much but not what i expected from Porsche) gets worse on uneven roads so it may be flex. I have Bose sound system which as you know makes the rear parcel shelf flex so i dont know if this contributes to the creak.
Pope said:
The tube that goes from the rear quarter in to the centre of the car has been known to fret and cause a creak / rattle, do you get the noise through body flex or impact? over potholes etc..
thats what i'm having a look at next. Theres a tsb on it but it was for cars older than mine but worth a try. Its only over certain roads but can get it to do it at anything from 20 - 70 mph on that road and seems to be getting worse or that might just be me
Edited by scoobyc on Wednesday 24th October 15:28
found it! it is indeed the strengthing bar that you can just see in the top pic, but its not under the seat as the tsb was for but where the tube goes through the framework next to the belt fixing. Just rubs ever so slighly when the car flexes so should manage to get something in between to stop it. Many thanks for the help 

Got it fixed by masking around the area and putting some sikaflex body sealer in it (black silicone type stuff)from the front and the back around the tube and between the plate. Pretty sure you need to remove the door card to do it right and remove the seatbelt to get at it properly (but not disconnect it just move it out of the way while still connected)but might be able to do it by just removing the bottom seat part and moving the carpet back but not sure. I took everything out without much hassle and all went back easily enough, but left the seats out as i thought it was better without them (left the belts in though) 

Gassing Station | Porsche General | Top of Page | What's New | My Stuff








