Best supplier for Cup1 alloys for 968CS
Discussion
Be careful to check that you are getting the right size and offset for a 968. The ebay ones (I assume you mean this: http://cgi.ebay.co.uk/PORSCHE-911-TURBO-CUP-1-944-... have 7" fronts, but 968s should have 7.5" fronts. Offsets should be 65 front and 55 rear.
Thanks for the advice
I have gone to a recomended supplier, but the say the offsets are 7.5x17 et52 and 9x17 et47 !
Confussed now
I want them for my track tyres, so I don't want to have to mess around with set ups when chaging from one to another.
The car is at a garage at the momement, can anyone tell me if the origionals are marked up with the offset and I'll ask the mechanic to look for me.
Many Thanks in advannce
Shawn
I have gone to a recomended supplier, but the say the offsets are 7.5x17 et52 and 9x17 et47 !
Confussed now
I want them for my track tyres, so I don't want to have to mess around with set ups when chaging from one to another.
The car is at a garage at the momement, can anyone tell me if the origionals are marked up with the offset and I'll ask the mechanic to look for me.
Many Thanks in advannce
Shawn
Hi Shawn, Welcome to the 968 fold dude great track car. those offsets that you been given are for replica cups, but they will fit just fill out the arches a bit more than genuine offsets, as people have said hard to come by if you want them fast, get some carrera lightweights off a 996 50mm offset front and 65mm offset rear, bang some toyo 888's on you wont go wrong imo. all the best chris. i post on 968uk as pazzer, see you at track next year.
Gassing Station | Porsche General | Top of Page | What's New | My Stuff




), so be careful what you get, or check the guarantee (and the wheels after each session!).