993RS Geometry Settings
993RS Geometry Settings
Author
Discussion

speedyellowrs

Original Poster:

468 posts

238 months

Friday 26th October 2007
quotequote all
Anyone out there have a good source for geo settings on 993RS? Would be very grateful for any assistance.

Cheers

Johnny

ineedagallardo

1,601 posts

263 months

Friday 26th October 2007
quotequote all
Try center Gravity.

http://www.centergravity.co.uk/

They did my Gt2 on monday and i cant recomend chris enough,

They are more than reasonably priced without the hidden extra's unlike some other companys rolleyes

Steve Rance

5,453 posts

262 months

Friday 26th October 2007
quotequote all
speedyellowrs said:
Anyone out there have a good source for geo settings on 993RS? Would be very grateful for any assistance.

Cheers

Johnny
It depends on how you drive the car. If you can work the nose of the car well, your idea of an ideal set up will be different to a driver that cannot. Set up is very driver specific, my advice is to work out exactly what you want from your car and then take it to a geo shop that can give you the set up you want.


Steve R

speedyellowrs

Original Poster:

468 posts

238 months

Friday 26th October 2007
quotequote all
Hi Steve
I´m looking for settings that would accomodate fast road driving and occasional track work... 2 or 3 trackdays a year on track oriented rubber. Are factory settings appropriate or should I seek advice on set up from one of the specialists out there... Parr etc?
Regards
Johnny

Steve Rance

5,453 posts

262 months

Friday 26th October 2007
quotequote all
I'd give Parr a call and tell them exaclty what you expect from the car and your experience of circuit driving. They will ask you lots of questions and work something out that is taylored to you.

steve

ineedagallardo

1,601 posts

263 months

Friday 26th October 2007
quotequote all
speedyellowrs said:
Hi Steve
I´m looking for settings that would accomodate fast road driving and occasional track work... 2 or 3 trackdays a year on track oriented rubber. Are factory settings appropriate or should I seek advice on set up from one of the specialists out there... Parr etc?
Regards
Johnny
Chris at center gravity will go through all of your needs in what you want from the car, how you intend to drive and where etc etc.

He can then work out an exact tailored package for yourself explainging exactly what each of his adjustments will do to the charicteristics of the car and how they will effect and improve handling.

Watching this guy work is an art in itself, He really is spot on and a perfectionist.

Steve Rance

5,453 posts

262 months

Friday 26th October 2007
quotequote all
Interesting. 911's are a bit of a rubix cube when it comes to set up. Does he have a 911 back ground?

ineedagallardo

1,601 posts

263 months

Friday 26th October 2007
quotequote all
Steve Rance said:
Interesting. 911's are a bit of a rubix cube when it comes to set up. Does he have a 911 back ground?
Yup he's been working on 911's for years,

I decided to go with him after another very pleased ph'er who had used a number of reputable Porsche specialists with no joy.

With Chris its not just a job, Its his passion and this shows through with his accuracy and dedication to perfection.

After having my car done by Jz twice it still felt very skittish and unstable at high speed and due to the aggressive settings, i felt scared to push the car hard into the twistys.

Since having it done it now feels so stable at speed and through corners it really is hard to believe its the same car,

It has more rear end grip and the speed I'm able to carry through corners with confidence still amazes me smile.

My cars a Gt2 with 608bhp,

Now I'm led to believe that these have quite a lot of adjustment,

The fact he was able to tame this beast speaks volumes to me.

Edited by ineedagallardo on Friday 26th October 15:27

clubsport

7,420 posts

289 months

Friday 26th October 2007
quotequote all
Parr did the fast road/trackwork set up on mine, seemed ok when it came back. lower. cornered flat, tyres wore evenly..etc...all good!smile...it appears their settings are a big secret though...John993RSR C was kind enough to detail his exact toe/camber/bar settings...stoopidly I can't find them right now...hopefully he will be along soon.

MauriceC2S

230 posts

286 months

Friday 26th October 2007
quotequote all
I trust you will copy me when they turn up, Paul .. 9Ms turned out to be 2+ degrees of neg camber and a ride height somewhere under the road surface (only kidding .. ;-) ).

cheers, Maurice

johnny senna

4,073 posts

303 months

Friday 26th October 2007
quotequote all
ineedagallardo said:
speedyellowrs said:
Hi Steve
I´m looking for settings that would accomodate fast road driving and occasional track work... 2 or 3 trackdays a year on track oriented rubber. Are factory settings appropriate or should I seek advice on set up from one of the specialists out there... Parr etc?
Regards
Johnny
Chris at center gravity will go through all of your needs in what you want from the car, how you intend to drive and where etc etc.

He can then work out an exact tailored package for yourself explainging exactly what each of his adjustments will do to the charicteristics of the car and how they will effect and improve handling.

Watching this guy work is an art in itself, He really is spot on and a perfectionist.
I have heard a huge amount of good things about this guy recently. There's a chap Mick Summer who has a yellow 993 RS who had his done by these folks recently........they spent all day on the job and he didn't leave the workshop until 9pm or something. He says the car drives beautifully. I would be tempted to try him at some point.

Butzi

489 posts

272 months

Friday 26th October 2007
quotequote all

Slippydiff

16,503 posts

254 months

Friday 26th October 2007
quotequote all
whistle

http://www.pistonheads.co.uk/gassing/topic.asp?h=0...

shout No magic, no BS, just one man on a mission to make your car handle as its maker intended.

ineedagallardo

1,601 posts

263 months

Friday 26th October 2007
quotequote all
johnny senna said:
ineedagallardo said:
speedyellowrs said:
Hi Steve
I´m looking for settings that would accomodate fast road driving and occasional track work... 2 or 3 trackdays a year on track oriented rubber. Are factory settings appropriate or should I seek advice on set up from one of the specialists out there... Parr etc?
Regards
Johnny
Chris at center gravity will go through all of your needs in what you want from the car, how you intend to drive and where etc etc.

He can then work out an exact tailored package for yourself explainging exactly what each of his adjustments will do to the charicteristics of the car and how they will effect and improve handling.

Watching this guy work is an art in itself, He really is spot on and a perfectionist.
I have heard a huge amount of good things about this guy recently. There's a chap Mick Summer who has a yellow 993 RS who had his done by these folks recently........they spent all day on the job and he didn't leave the workshop until 9pm or something. He says the car drives beautifully. I would be tempted to try him at some point.
Yup, Same as me.

Got there at 10.30am and didn't leave till nearly 9pm.

The cost?

£392,

The guys such a Gent and i was so impressed with how the car performed i told him to take £450 off my card as a drink.

He wouldn't have any of it, I then offered him a £20 note and told him he had to take something,

Again he declined before telling me that if i was unhappy with it in anyway at all to give him a call and he would rectify the problem.

Truly a top man and its very hard to find someone that turns down a drink for there hard work these days.

NineMeister

1,146 posts

289 months

Friday 26th October 2007
quotequote all
MauriceC2S said:
I trust you will copy me when they turn up, Paul .. 9Ms turned out to be 2+ degrees of neg camber and a ride height somewhere under the road surface (only kidding .. ;-) ).

cheers, Maurice
Mind you, it's common knowledge how badly my car handles and it's definitely only the engine power that lets it beat modified GT3RS's wink

9m 993RSCS on track

Edited by NineMeister on Friday 26th October 23:38

gary11

4,163 posts

232 months

Saturday 27th October 2007
quotequote all
mike pickup is good (pk motorsport) situated near wembley,a nice man a racer himself met him at le mans last time he raced there,he gave a chat at the owners club camp site let us go in the pit garage very knowledgeable,
gary

baptistsan

1,923 posts

241 months

Saturday 27th October 2007
quotequote all
Where in the country are you? Chris is doing a tech. talk for Porsche owners on the 19th if it is of any interest.

speedyellowrs

Original Poster:

468 posts

238 months

Sunday 28th October 2007
quotequote all
Thanks for all the info, Guys. Looks like I've got some thinking to do and some phone calls to make...

Many thanks to all thumbup

Cheers

Johnny

MauriceC2S

230 posts

286 months

Sunday 28th October 2007
quotequote all
NineMeister said:
MauriceC2S said:
I trust you will copy me when they turn up, Paul .. 9Ms turned out to be 2+ degrees of neg camber and a ride height somewhere under the road surface (only kidding .. ;-) ).

cheers, Maurice
Mind you, it's common knowledge how badly my car handles and it's definitely only the engine power that lets it beat modified GT3RS's wink

9m 993RSCS on track

Edited by NineMeister on Friday 26th October 23:38
Speaking of engine power, how about doing a 993 Register Engine Seminar sometime next year, Colin? I certainly liked the sound of OJT's mildly tweaked motor at Silverstone .. Maybe around the RS track day at Oulton ?

It was OJTs alignment I was referring to - it is verryy low ..

cheers, Maurice

oliverjthomas

123 posts

249 months

Sunday 28th October 2007
quotequote all
Thought my ears were burning, Maurice!

In fairness to Colin and Robin, they aren't responsible for the fitment of the suspension. Autofarm fitted it for the previous owner and as is typical with Billies, they're fairly siezed and will need removing from the car to free them up and adjust them. Robin has done wonders with what he was presented with and as soon as I've got my latest project done and dusted, I'm going the KW route.

By the way, when are we going to have a meet on track? You're more than welcome to see what some of Colin's 'tame' engineering can do bow