964 Tyres
Author
Discussion

G T 3

Original Poster:

2,142 posts

285 months

Saturday 27th October 2007
quotequote all
Sorry to bring this old chest nut up,best tyre size for 964 please,car will be lowered.

robmug

1,047 posts

294 months

Saturday 27th October 2007
quotequote all
front 205/50 x 17; Rear 255/40 x 17

Mine's lowered to RS height and tyres don't normally foul the arches...Michelin's did though.

robmug

1,047 posts

294 months

Saturday 27th October 2007
quotequote all

G T 3

Original Poster:

2,142 posts

285 months

Saturday 27th October 2007
quotequote all
Are those 18s on your car,what make of tyres?

r5gttgaz

7,897 posts

251 months

Saturday 27th October 2007
quotequote all
Ive got conti-sports on my 64 c2. Proving to be a very good tyre.

warmfuzzies

4,383 posts

284 months

Saturday 27th October 2007
quotequote all
17's are the norm, If you've a C4, then try 225's up front to help with the understeer...

18's run 225 and 265 as the norm.

I'm on 18's


kevin

Bosh 964

70 posts

234 months

Tuesday 30th October 2007
quotequote all
Couple of Qs:

1. Do front 225s need spacers on 17" wheels on a 964?
2. Can you get Conti SC2s in an N rating in 225s?

G T 3

Original Poster:

2,142 posts

285 months

Tuesday 30th October 2007
quotequote all
Also 205 or 225 front? what about 215, and are front and back 40 profile..I have been advised to use spacer on rear to fill arches with 255,what thickness spacer. Arches are not rolled.
I had contins on my 965 and would use again mainly fast road use this year,any one say no, if so what do you recommend?

Edited by G T 3 on Tuesday 30th October 09:41

robh964

116 posts

259 months

Tuesday 30th October 2007
quotequote all
17's on my C4. Lowered and setup to a near as poss. to RS spec.

245 SSR's with 15mm spacer on the back
225 SSR's without spacer on the front (but I could do with a 5mm to stop the rubbing on full lock, anyone got a pair cheap?!?!)

Had conti's before but killed them on track, looking for an alternative to SSR's now.

Rob

G T 3

Original Poster:

2,142 posts

285 months

Tuesday 30th October 2007
quotequote all
245? Post pics of car please..

robh964

116 posts

259 months

Tuesday 30th October 2007
quotequote all
I'll get some sorted this week.

Rob

robmug

1,047 posts

294 months

Tuesday 30th October 2007
quotequote all
G T 3 said:
Are those 18s on your car,what make of tyres?
17" wheels. I'm on ContiSport Contacts (N2 I think) - my favourite tyre (seriously) for the 964.

G T 3

Original Poster:

2,142 posts

285 months

Tuesday 30th October 2007
quotequote all
In the pic arnt they 18 inch turbos?

ian_uk

1,616 posts

242 months

Tuesday 30th October 2007
quotequote all
They'll be 17" version you get on Boxsters.

HAB

3,632 posts

258 months

Tuesday 30th October 2007
quotequote all
Bridgestone S-02 N3 F 205/50/17 R 255/40/17

gregorio!

1,179 posts

269 months

Tuesday 30th October 2007
quotequote all
Pete,
I have used 205/50/17 and currently use 225/45/17 fronts. With 215/45s the overall tyre diameter is 625mm. 205/50/17=637mm and 225/45/17=634mm so the 215s are a bit out at - i'd avoid it personally. Go for the 225s, you get a fractionally bigger braking footprint & slightly less understeer.

I run RS geom and 225s on the front have caused me no rubbing problems, but some people do get issues with them. I think a 5mm spacer is all thats needed though. Be careful putting too much spacer on the front, the tyre can catch the inner arch and make a mess of it, ask me how i know! I run a fairly safe 15mm spacer on my 255 rears.

and just because everyone else is...

robmug

1,047 posts

294 months

Tuesday 30th October 2007
quotequote all
G T 3 said:
In the pic arnt they 18 inch turbos?
The do indeed look like them, but they are the 17" Porsche approved replicas, made by Mille Miglia (and no longer available either). Bought the car with them on intending to swap them immediately for Cup1s, but they seem to suit the car and now I can't bring myself to change them!

G T 3

Original Poster:

2,142 posts

285 months

Tuesday 30th October 2007
quotequote all
Cheers lads totally confused but the answer is there,just need my PH code cracking book...Rob those do look good

G T 3

Original Poster:

2,142 posts

285 months

Monday 5th November 2007
quotequote all
Been advised to go 205 50 up front on cups, by all dealers,Im going for contis,is this the best thing....