964 Towing eyes???
Discussion
Turns out the towing eye was the least of our probs. Came back to the car after lunch and noticed the exhaust was 3 inches lower than normal. New to Porsche mechanics, I thought an exhaust mount had failed.....doh! After a bit of lamp action, found that the engine carrier had failed about 5 inches left of the rear RHS mount.
Gave the G/F the keys to the Ult and she and Sean Edwards carried on in that!! (so to speak...)
Question is:
Is this a common failure, and is it easy to DIY?
Gave the G/F the keys to the Ult and she and Sean Edwards carried on in that!! (so to speak...)
Question is:
Is this a common failure, and is it easy to DIY?
LuckyP said:
Turns out the towing eye was the least of our probs. Came back to the car after lunch and noticed the exhaust was 3 inches lower than normal. New to Porsche mechanics, I thought an exhaust mount had failed.....doh! After a bit of lamp action, found that the engine carrier had failed about 5 inches left of the rear RHS mount.
Gave the G/F the keys to the Ult and she and Sean Edwards carried on in that!! (so to speak...)
Question is:
Is this a common failure, and is it easy to DIY?
Was a real shame, she was really getting to grips with the car as well! She loved the Ultima anyway and it is a seriously great car...Gave the G/F the keys to the Ult and she and Sean Edwards carried on in that!! (so to speak...)
Question is:
Is this a common failure, and is it easy to DIY?
All very well, if you are racing and their is a prize I guess, I don't quite see the point in taking that much kerb on a trackday, unless you are more than happy to spend out on the higher liklihood of repair that may be required on your car...or as you were unfortunate enough to find out, being unable to continue the trackday in that car.
That looks like an engine out job. I don't think you can get at the bolts that hold that crossmember to the engine without. TBH I'm amazed then engine hasn't fallen out already. The engine out isn't too bad. You'll need a couple of floor jacks, a nice chunky piece of timber (perhaps a railway sleeper), a strong dolly for the engine and a a reasonable ammount of space.
Given that you probably don't need to do much beyond replacing that crossmember, it's probably just a couple of days work (at a relaxed pace). The only problem with these things is that if the engine hasn't been out for a while (as yours appears not to have) the act of taking the engine out can damage other things, and you then end up having to replace them.
HTH.
Given that you probably don't need to do much beyond replacing that crossmember, it's probably just a couple of days work (at a relaxed pace). The only problem with these things is that if the engine hasn't been out for a while (as yours appears not to have) the act of taking the engine out can damage other things, and you then end up having to replace them.
HTH.
Edited by dilbert on Sunday 4th November 02:54
G T 3 said:
...Alloy now black and waiting on garage floor...
And the car???G T 3 said:
......What you doing up at 5am..........
'Dis:http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Gassing Station | Porsche General | Top of Page | What's New | My Stuff









