Laserline Alarm
Discussion
Hi all
I have an alarm fitted to my S2 it appears to be a Laserline 936, although I cannot find this on the Laserline website. I have emailed them but was wondering if anyone had any information regarding this alarm. Unfortunately when I bought the car there was no info. The alarm is diconnected and if I reconnect it goes off. I need to get the wiring diags so I can try and get it working properly

I have an alarm fitted to my S2 it appears to be a Laserline 936, although I cannot find this on the Laserline website. I have emailed them but was wondering if anyone had any information regarding this alarm. Unfortunately when I bought the car there was no info. The alarm is diconnected and if I reconnect it goes off. I need to get the wiring diags so I can try and get it working properly

I haven't fiddled with alarms for years so they may have moved on a bit - but I do know that they always used to go off when you connected the power - you then had to disarm it to shut it up.
If it locks the doors aswell make sure the window is open or you'll lock the keys in the car......
Chris
If it locks the doors aswell make sure the window is open or you'll lock the keys in the car......
Chris
Edited by Barkychoc on Saturday 3rd November 14:58
laserline 936 if i remember right is an old thatcham cat 1 alarm.by conecting the power up the alarm will go off until you disarm it with the fob.these were very problematic and if it has been powerd down then suspect its faulty, my advise to you would be to fit a new one. you could spend days trying to get it work.
andy
andy
www.bridgwater-electronics.co.uk were excellent in providing a replacement key and the all important re-programming instruction for my old Laserline immobiliser, so they may be able to help out.
Gassing Station | S Series | Top of Page | What's New | My Stuff


