993 As Daily Driver - road salt/corrosion?
993 As Daily Driver - road salt/corrosion?
Author
Discussion

finmac

Original Poster:

1,712 posts

269 months

Saturday 3rd November 2007
quotequote all
Thinking of a 993 as a daily driver, given the cars are now 13 years or so old, are there any corrosion issues out there (assuming its a straight car with no previous accident damage)?

Also how will they fair if exposed to road salt and whats the best way to protect them from corrosion (waxoyl and the like?)

abarber

1,713 posts

272 months

Saturday 3rd November 2007
quotequote all
Yes there are unfortnately, just the same places as a 964. Check at the bottom of the front windscreen pillars, right next to the seal. That and at the back around the rear window edges seem to be popular, due to the paint cracking / flexing.

Edit: also had to get the rear bumper mounts and some other minor metal work underneath replaced. Heat shields I think.

This was on my 11 year old 993.

Cheers, Alan



Edited by abarber on Saturday 3rd November 17:06

sidned

480 posts

247 months

Saturday 3rd November 2007
quotequote all
There are some common rust issues, mainly around the bottom of the A pillars and around the rear window rubbers. The A pillar issue needs the screen to come out to do properly. Providing the previous owner cleans the wheel arches out each week, and the paintwork is looked after with a good wax and polish a couple of times each year, there shouldn't be any other issues. The only other problem is poorly repaired accident damage, so an inspection is a must.

nrayner

3,058 posts

313 months

Saturday 3rd November 2007
quotequote all
Around the top of the door windows can blister a bit.


nrayner

3,058 posts

313 months

Saturday 3rd November 2007
quotequote all
sidned said:
Providing the previous owner cleans the wheel arches out each week
I'm sure mine has plastic looking liners - which bit in particular is the issue ?

Pickled Piper

6,452 posts

266 months

Saturday 3rd November 2007
quotequote all
nrayner said:
sidned said:
Providing the previous owner cleans the wheel arches out each week
I'm sure mine has plastic looking liners - which bit in particular is the issue ?
Mine had started corroding at the rear of the front wheel arches. The area was heavily stone chipped. I've seen a few with this problem.

pp

finmac

Original Poster:

1,712 posts

269 months

Saturday 3rd November 2007
quotequote all
Thanks guys,

Is this surface rust we are talking about here?

And is it from the outside in or the inside out please?

cheers Finlay

sidned

480 posts

247 months

Sunday 4th November 2007
quotequote all
nrayner said:
sidned said:
Providing the previous owner cleans the wheel arches out each week
I'm sure mine has plastic looking liners - which bit in particular is the issue ?
Mud can build up in the lip of the wheel arches. Reach in and you should feel if they are clean or not. The plastic liners don't protect this area.

nrayner

3,058 posts

313 months

Sunday 4th November 2007
quotequote all
sidned said:
nrayner said:
sidned said:
Providing the previous owner cleans the wheel arches out each week
I'm sure mine has plastic looking liners - which bit in particular is the issue ?
Mud can build up in the lip of the wheel arches. Reach in and you should feel if they are clean or not. The plastic liners don't protect this area.
TVM. I shall be reaching and feeling when I get home tonight.

MJK 24

5,679 posts

267 months

Sunday 4th November 2007
quotequote all
Porsche people,

was the 911 shell dip galvanised as per mid 80's onwards Audi's? Or is it just the bolt on panels that are galvanised and the shell isn't?

I'm just curious as Porsche quality of that era was truly second to none yet people always tell you to look out for the rot whereas Audi's of that era can cover 250k miles plus without a spot of the dreaded tin worm. What gives?

Thanks smile

9hellheaven

1,595 posts

240 months

Sunday 4th November 2007
quotequote all
Well built of the era..sure they were well built but not as well built as some folk would have you think!
Its going to be a time will tell thing, but without wanting to start the usual la la la, I honestly think you will find the more modern series 996/997 will last the test of time better.
The best cars in any of the models are the ones that have been pamperd most of their lives..and not driven throgh ten or winters. Lots of the underneath/wings etc are very open to the elements on the older cars.

Pickled Piper

6,452 posts

266 months

Sunday 4th November 2007
quotequote all
MJK 24 said:
Porsche people,

was the 911 shell dip galvanised as per mid 80's onwards Audi's? Or is it just the bolt on panels that are galvanised and the shell isn't?

I'm just curious as Porsche quality of that era was truly second to none yet people always tell you to look out for the rot whereas Audi's of that era can cover 250k miles plus without a spot of the dreaded tin worm. What gives?

Thanks smile
The shell was galvanised. I wouldn't say they were any better for corrosion protection than an Audi or VW of that era.

pp

sleep envy

62,260 posts

280 months

Sunday 4th November 2007
quotequote all
finmac said:
exposed to road salt
: shudder :

Agent Orange

2,078 posts

271 months

Monday 5th November 2007
quotequote all
Ive run a 993 rs NOT UNDERSEALED from new for 5 years in all weather to work and back and track days ..........point ,its always out there and battered by stones .............the black window trims bubble , 'cos some got badly made at the factory some got chipped and thats wear and tear, eitherway u cud nt get them replaced under 10 yr warranty ever ! Front and rear screens , especially early ones cud suffer from ruubber chaffing paint ......was done under warranty , need close inspection ie pull the rubber up and look even if they appear clean !!! Door straps snap , different issue ? Back of wheel arches do get he hell of a pasting and suffer , possible to get repainted properly once and Armourfend , or similar .............the only serious rust on 993 IMO of any sort is after they ve been stuffed when they re not properly repaired , cut into any Galvanised steel and expose an edge and dont cocover it in correct producte = IT WILL RUST !!!
If looked after with a bucket of warm soapy water and cared for normally they will last a lot longer !!!! Plastic liners are nt perfect and rear p/u struts get so much heat and stuff thrown at them they do give up around 10/12 year mark £75 each not momentous ..........talking of Audis u would nt want to see the last A3 we had in the family after 3 years and 22k miles a disgrace and no interest from Audi watsoever