Discussion
after a bit of digging i found a borg and beck dealer,autospares, sutton auto factors.phoned the guy karl there,who was very helpfull,and who suggested i send my knacked clutch to him for identification. so did this and he has matched up a kit for my s3 (type n gearbox and 2.9 engine). prices are £39 for a recon kit and £59 plas vat for a new one. well chuffed
their number is 0115 964 7600. does anyone know how to put this into the parts list?
their number is 0115 964 7600. does anyone know how to put this into the parts list?
kev s3 said:
their number is 0115 964 7600. does anyone know how to put this into the parts list?
If you have any parts info, will add it to the list at
www.tvrcc-south-wales.co.uk/sparts.asp
or if anyone has any other info to add.
Cheers....Steve Parker
Clutch in the 2.9 cars is a 240mm Ford unit as used in 2.9 4x4 and XR4i.
Also, 2WD Sierra Cossie clutch fits - just check splines for the drive. This is what I had in mine.
I have a Motorcraft unit now, that has done 28,000 hard (Sprint / Hillclimb) miles and is still good!
Costs peanuts - just takes HOURS to change!
I think Burton Power do some good uprated units at reasonable prices.
Marcus
Also, 2WD Sierra Cossie clutch fits - just check splines for the drive. This is what I had in mine.
I have a Motorcraft unit now, that has done 28,000 hard (Sprint / Hillclimb) miles and is still good!
Costs peanuts - just takes HOURS to change!
I think Burton Power do some good uprated units at reasonable prices.
Marcus
Gassing Station | S Series | Top of Page | What's New | My Stuff