Buying advise: Classic 911
Discussion
rust rust and rust.........smokey engines, rattley engines, check the oil level, remove front carpet underneath bonnet check the chassis legs are not bent/repaired, the car will have had plenty of paintwork at that age, make sure its good quality, gearbox will be the earlier type (915) these can feel a little sticky, but make sure its not difficult to get into gear as that means rebuild time.............there is an awful lot to check and unless you are very experienced in appraising cars i would suggest an Pre Purchase Inspection by a porsche specialist.Ideally you want to see some serice history and bills and paperwork...however a car is keenly priced and it passes a PPI, then thats personal choice.
Ps at least half the cars you look at that are that old will not be very nice.
Chadders said:
its actually for sale for £5500 and needs new wings..
but need to find out if its worth restoring ....
Short answer is no. If it needs wings it will need inner wing repairs, inner and out sills, kidney bowls and B post, windscreen corners etc. etc. Budget over £10K on the body alone before you start on the mechanics and interior. If you want to see what to look for I am doing an 85 3.2 for a customer at the moment, 3 of the wings are off so you can see all the problem areas.but need to find out if its worth restoring ....
Sorry about this poorcardealer - I don't like to be critical of others (don't like it myself) especially when everyone is trying to help and anyway I enjoy the helpful offerings of many of the trade who contribute - like yourself - so sorry to disagree about one point you raised - as follows.
The 915 gearbox has a synchro system that is quite stiff when the parts are new and gradually gets less stiff, until one day it starts to go into gear just like a G50 box or more modern car - so far - so good (as the chap said as he passed the 2nd floor after jumping off the empire state building).
Just like that - dissaster awaits - as this is a sign that the synchro system is worn out and soon the engagement dogs will not be slowed down and the gear engagement will be completely lost.
Poorcardealer is right if the engagement difficulty is a crunching noise (thats in between it going sweet and breaking), but wrong if the gear is just tight to push fully into gear (as this is actually a sign that it might just have been recently replaced - or low mileage).
These cars are becoming extremely expensive to own and keep going. They almost all wear out piston rings and need at least top end overhauls by now - so engine rebuilds are on the cards.
Worse is corrosion - not just to the wings areas but at the rear near the bottom of the door corner inside the wing to body part, petrol tanks, fuel lines, rear end wiring looms etc etc. Many body parts are no longer available and need manufacturing and the body problems are an MOT failure area and expensive to replace.
This is why (I think) prices of properly renovated and rebuilt examples are now rising sharply - so the cost can be justified as long as you can afford the cost in between buying and selling (or just to keep and never recover).
I would expect examples that have never been rebuilt in engines or gearboxes and no rusty body parts replaced - may cost £10K to £20K to restore and keep going in the next few years - so if nothing has previously been addressed - the purchase price must clearly be low compared to one that has had work done or been so well protected over the years to need less than normal work.
They are brilliant cars and nice examples will always hold good prices but I think the likely costs in the next few years - are much higher than most individuals who have lusted after one of these one day - may appreciate.
You could easily get trapped with a car half restored - not finished and being unable to complete and lose a lot on the experience - especially if a lot more problem examples come to the market and lower prices generally.
The overall increase in the number of newer used Porsches in the market place and the resulting moderate prices (like 968's, Boxsters etc) may result in more of these old 911's being scrapped as more people decide to move on to newer cars to avoid these corrosion problems. This will still leave those restored examples worth a lot as they will be less in number - but newer cars had plastic wing liners and sill covers and may well prove to last longer (bodywise) and therefore gradually change the relative values of different models.
Baz
The 915 gearbox has a synchro system that is quite stiff when the parts are new and gradually gets less stiff, until one day it starts to go into gear just like a G50 box or more modern car - so far - so good (as the chap said as he passed the 2nd floor after jumping off the empire state building).
Just like that - dissaster awaits - as this is a sign that the synchro system is worn out and soon the engagement dogs will not be slowed down and the gear engagement will be completely lost.
Poorcardealer is right if the engagement difficulty is a crunching noise (thats in between it going sweet and breaking), but wrong if the gear is just tight to push fully into gear (as this is actually a sign that it might just have been recently replaced - or low mileage).
These cars are becoming extremely expensive to own and keep going. They almost all wear out piston rings and need at least top end overhauls by now - so engine rebuilds are on the cards.
Worse is corrosion - not just to the wings areas but at the rear near the bottom of the door corner inside the wing to body part, petrol tanks, fuel lines, rear end wiring looms etc etc. Many body parts are no longer available and need manufacturing and the body problems are an MOT failure area and expensive to replace.
This is why (I think) prices of properly renovated and rebuilt examples are now rising sharply - so the cost can be justified as long as you can afford the cost in between buying and selling (or just to keep and never recover).
I would expect examples that have never been rebuilt in engines or gearboxes and no rusty body parts replaced - may cost £10K to £20K to restore and keep going in the next few years - so if nothing has previously been addressed - the purchase price must clearly be low compared to one that has had work done or been so well protected over the years to need less than normal work.
They are brilliant cars and nice examples will always hold good prices but I think the likely costs in the next few years - are much higher than most individuals who have lusted after one of these one day - may appreciate.
You could easily get trapped with a car half restored - not finished and being unable to complete and lose a lot on the experience - especially if a lot more problem examples come to the market and lower prices generally.
The overall increase in the number of newer used Porsches in the market place and the resulting moderate prices (like 968's, Boxsters etc) may result in more of these old 911's being scrapped as more people decide to move on to newer cars to avoid these corrosion problems. This will still leave those restored examples worth a lot as they will be less in number - but newer cars had plastic wing liners and sill covers and may well prove to last longer (bodywise) and therefore gradually change the relative values of different models.
Baz
hartech said:
Sorry about this poorcardealer - I don't like to be critical of others (don't like it myself) especially when everyone is trying to help and anyway I enjoy the helpful offerings of many of the trade who contribute - like yourself - so sorry to disagree about one point you raised - as follows.
The 915 gearbox has a synchro system that is quite stiff when the parts are new and gradually gets less stiff, until one day it starts to go into gear just like a G50 box or more modern car - so far - so good (as the chap said as he passed the 2nd floor after jumping off the empire state building).
Just like that - dissaster awaits - as this is a sign that the synchro system is worn out and soon the engagement dogs will not be slowed down and the gear engagement will be completely lost.
Poorcardealer is right if the engagement difficulty is a crunching noise (thats in between it going sweet and breaking), but wrong if the gear is just tight to push fully into gear (as this is actually a sign that it might just have been recently replaced - or low mileage).
These cars are becoming extremely expensive to own and keep going. They almost all wear out piston rings and need at least top end overhauls by now - so engine rebuilds are on the cards.
Worse is corrosion - not just to the wings areas but at the rear near the bottom of the door corner inside the wing to body part, petrol tanks, fuel lines, rear end wiring looms etc etc. Many body parts are no longer available and need manufacturing and the body problems are an MOT failure area and expensive to replace.
This is why (I think) prices of properly renovated and rebuilt examples are now rising sharply - so the cost can be justified as long as you can afford the cost in between buying and selling (or just to keep and never recover).
I would expect examples that have never been rebuilt in engines or gearboxes and no rusty body parts replaced - may cost £10K to £20K to restore and keep going in the next few years - so if nothing has previously been addressed - the purchase price must clearly be low compared to one that has had work done or been so well protected over the years to need less than normal work.
They are brilliant cars and nice examples will always hold good prices but I think the likely costs in the next few years - are much higher than most individuals who have lusted after one of these one day - may appreciate.
You could easily get trapped with a car half restored - not finished and being unable to complete and lose a lot on the experience - especially if a lot more problem examples come to the market and lower prices generally.
The overall increase in the number of newer used Porsches in the market place and the resulting moderate prices (like 968's, Boxsters etc) may result in more of these old 911's being scrapped as more people decide to move on to newer cars to avoid these corrosion problems. This will still leave those restored examples worth a lot as they will be less in number - but newer cars had plastic wing liners and sill covers and may well prove to last longer (bodywise) and therefore gradually change the relative values of different models.
Baz
Fair comments Baz, and I agree they are getting expensive to run unless you find a gem to start with.The 915 gearbox has a synchro system that is quite stiff when the parts are new and gradually gets less stiff, until one day it starts to go into gear just like a G50 box or more modern car - so far - so good (as the chap said as he passed the 2nd floor after jumping off the empire state building).
Just like that - dissaster awaits - as this is a sign that the synchro system is worn out and soon the engagement dogs will not be slowed down and the gear engagement will be completely lost.
Poorcardealer is right if the engagement difficulty is a crunching noise (thats in between it going sweet and breaking), but wrong if the gear is just tight to push fully into gear (as this is actually a sign that it might just have been recently replaced - or low mileage).
These cars are becoming extremely expensive to own and keep going. They almost all wear out piston rings and need at least top end overhauls by now - so engine rebuilds are on the cards.
Worse is corrosion - not just to the wings areas but at the rear near the bottom of the door corner inside the wing to body part, petrol tanks, fuel lines, rear end wiring looms etc etc. Many body parts are no longer available and need manufacturing and the body problems are an MOT failure area and expensive to replace.
This is why (I think) prices of properly renovated and rebuilt examples are now rising sharply - so the cost can be justified as long as you can afford the cost in between buying and selling (or just to keep and never recover).
I would expect examples that have never been rebuilt in engines or gearboxes and no rusty body parts replaced - may cost £10K to £20K to restore and keep going in the next few years - so if nothing has previously been addressed - the purchase price must clearly be low compared to one that has had work done or been so well protected over the years to need less than normal work.
They are brilliant cars and nice examples will always hold good prices but I think the likely costs in the next few years - are much higher than most individuals who have lusted after one of these one day - may appreciate.
You could easily get trapped with a car half restored - not finished and being unable to complete and lose a lot on the experience - especially if a lot more problem examples come to the market and lower prices generally.
The overall increase in the number of newer used Porsches in the market place and the resulting moderate prices (like 968's, Boxsters etc) may result in more of these old 911's being scrapped as more people decide to move on to newer cars to avoid these corrosion problems. This will still leave those restored examples worth a lot as they will be less in number - but newer cars had plastic wing liners and sill covers and may well prove to last longer (bodywise) and therefore gradually change the relative values of different models.
Baz
Gassing Station | Porsche General | Top of Page | What's New | My Stuff


