964 Lowering springs
Discussion
Been through this before,but still not sure.I need to know by monday what are the lowest or best option springs to get the car low.It has new Bilstein sport shocks and possibly eibach (spelling?) springs which are new all by previous owner,but it is not low enough for me,I am thinking HR red would be lower,what are the green ones and why are turbo HRs often used?
Any side pics of cars with bils' and HR or what ever would be good...
Cheers
Any side pics of cars with bils' and HR or what ever would be good...
Cheers
Edited by G T 3 on Saturday 10th November 18:53
G T 3 said:
By the way got rid of our new A4 2L turbo FSI S line avant....loads of agro..Audi pi**ed me off.Pxed for new Passat saloon same 200 hp motor, loads more room and full of toys...lesser build quality and curb appeal, but 2 small sprogs plus stuff = VW
I know where your coming from here i had problems with my initial Audi dealer from a service perspective when we had the A4 CAB, now found an alternative dealer and to be fair to them they have been very good. Main issue is as the brand has become more popular there isn't the infrastructure to support this and occasionaly you get poor service.GT3
I think the H&R springs are the lowest you can get 40mm I believe. (have no idea about the colour coded tho')
Eibach's lower by 30mm.
Both are progressive afaik
Both of these are give and take depending on your geo setup.
To get lower I think you have to go fully adjustable (PS9's, KW's etc)
or, get your blow torch out and chop off as much as you want, a la overhauling stylie!
Rob
I think the H&R springs are the lowest you can get 40mm I believe. (have no idea about the colour coded tho')
Eibach's lower by 30mm.
Both are progressive afaik
Both of these are give and take depending on your geo setup.
To get lower I think you have to go fully adjustable (PS9's, KW's etc)
or, get your blow torch out and chop off as much as you want, a la overhauling stylie!

Rob
Red for turbo springs, greens are progressive...
Horses for courses, I have greens, and sometimes wish I had reds when the pace is getting on a bit, but greens for the road.
IIRC greens are 40mm and reds are 30mm, but it also depends on how the threaded perch has been done, as the springs will sit wherever the perches are...
Kevin.
Horses for courses, I have greens, and sometimes wish I had reds when the pace is getting on a bit, but greens for the road.
IIRC greens are 40mm and reds are 30mm, but it also depends on how the threaded perch has been done, as the springs will sit wherever the perches are...
Kevin.
http://www.type-911.co.uk/ac_performance.htm
and design911 say about 35 for the reds,
H&R greens on the D911 site say 40mm.......
However, someone else may chip in and correct me, so you could always try Pelican parts, Shox.com Gert at Carnewal just to confirm...
Kevin.
and design911 say about 35 for the reds,
H&R greens on the D911 site say 40mm.......
However, someone else may chip in and correct me, so you could always try Pelican parts, Shox.com Gert at Carnewal just to confirm...
Kevin.
G T 3 said:
Pete is your engine sorted? ,are greens lower than red,why choose green any reason, I have billy sports new on the car so will leave them, does your car look low enough?
Concensus.....and impatience. Lou want's to use the car for daily hack, so as sweet as lower and stiffer would be, it would be too much of a niggle for her.But having just driven it for a few miles, I think you need something stiffer.......and if your drive/council will allow, go lower still.
My drive takes out GT2 and Ultima front splitters and the Billy Sport/H&R greens are a good inch clear.
It looks low, but not enough. IMO.
Engine carrier is out. (2hrs) New one on order from PARR. They wanted 8hrs for removal and replacement. Do you think the'll give me a job??

Gassing Station | Porsche General | Top of Page | What's New | My Stuff



