993 Alarm Problem - Help!
Discussion
Pulling my hair out as I cannot get my baby to start!
In typical winter style, my battery went flat and the remote wouldn't work. Charged the battery, but now the alarm won't switch off. Basically, the only way I can get into the car is with the key as the remote has no impact.
Tried searching on the web and followed the suggestions on Rennlist, but to no avail - switched on the ignition after 10 secs but the remote still didn't work; switched the ignition on and off twice, but this didn't work either.
HELP!!!
In typical winter style, my battery went flat and the remote wouldn't work. Charged the battery, but now the alarm won't switch off. Basically, the only way I can get into the car is with the key as the remote has no impact.
Tried searching on the web and followed the suggestions on Rennlist, but to no avail - switched on the ignition after 10 secs but the remote still didn't work; switched the ignition on and off twice, but this didn't work either.
HELP!!!
Phelix,
Unfortunately I don't have the little key as it never came with the car when I bought it. Have tried the other fob but no joy!
This is a nightmare - we are knocking the house down on Wednesday so I must get the Porker out of the drive before then
Will try Hamilton & Palmer tomorrow if Porsche GB can't help.
Thanks,
Dave
Unfortunately I don't have the little key as it never came with the car when I bought it. Have tried the other fob but no joy!
This is a nightmare - we are knocking the house down on Wednesday so I must get the Porker out of the drive before then

Will try Hamilton & Palmer tomorrow if Porsche GB can't help.
Thanks,
Dave
H&P were very helpful with replacing both alarm fobs & recoding my pa2000 a few weeks when I had the keys stolen. Seem to remember that the guy that does the Porsche work is only there a couple of days a week though.
Might be of no help but on my other car when you disconnect the battery the fobs won't work either. You have to press the unlock (or is it lock?) button 5 times to re-synchronise. In a similar vein for the alarm in my old VW golf you had to press and hold one of the buttons for 5 seconds or something like that. I guess each system is different - H&P are the experts, though, as they designed the pa 1000 /2000 systems.
Regards
Might be of no help but on my other car when you disconnect the battery the fobs won't work either. You have to press the unlock (or is it lock?) button 5 times to re-synchronise. In a similar vein for the alarm in my old VW golf you had to press and hold one of the buttons for 5 seconds or something like that. I guess each system is different - H&P are the experts, though, as they designed the pa 1000 /2000 systems.
Regards
I had exactly the same a couple of years ago. The solution involved sending the alarm back to H&P for resynching with the fob. They also suppled a new red fob which re-programems the system.
It involves taking the motherboard out which is under one of the seats. Car out of action for a week or so.
PM me if I can be of any help. It was quite straightforward if a little fiddly
James
It involves taking the motherboard out which is under one of the seats. Car out of action for a week or so.
PM me if I can be of any help. It was quite straightforward if a little fiddly
James
I have had this issue a few times, usually after a car has had a flat battery.
Disconnect the battery once again, locate and remove the three system fuses(a 20 Amp and either 1 x 3 Amp and 1 x 5 Amp, OR 2 x 3 Amp depending on build date) which are located either in the fuse box under the front lid or under the dash near the ignition switch. Switch on the vehicle ignition, reconnect the battery then reinsert the fuses and press the indented button. Switch off the ignition and attempt to lock and unlock the car.
This process has worked for me.
Disconnect the battery once again, locate and remove the three system fuses(a 20 Amp and either 1 x 3 Amp and 1 x 5 Amp, OR 2 x 3 Amp depending on build date) which are located either in the fuse box under the front lid or under the dash near the ignition switch. Switch on the vehicle ignition, reconnect the battery then reinsert the fuses and press the indented button. Switch off the ignition and attempt to lock and unlock the car.
This process has worked for me.
Gassing Station | Porsche General | Top of Page | What's New | My Stuff



