Discussion
My 996 (2003, 40k miles) turbo feels a bit slippery on the roads. It's hard to describe, but I feel like when cornering on something like a fast slip-road that the car is sliding across the lane slightly. It doesn't inspire the confidence I think it should do.
Now, it's parked half-on and half-off a low-ish kerb (Can't avoid that) so I'm sure I'm knocking the suspension a bit when parking. Obviously it's been over a few speed bumps too. Tyre pressures are as it says inside the fuel cap.
So, I'm figuring a 4-wheel aligmnent check will help? The question is - where from (I'm West London) and what else should I ask them to check?
Also, if they ask "what type of driving" I do - what do they alter on the car to change it? I want the car to feel safe and sure but what other options are there? What does all this camber / toe-in / blah blah do to the feel of the car?
Thanks
Now, it's parked half-on and half-off a low-ish kerb (Can't avoid that) so I'm sure I'm knocking the suspension a bit when parking. Obviously it's been over a few speed bumps too. Tyre pressures are as it says inside the fuel cap.
So, I'm figuring a 4-wheel aligmnent check will help? The question is - where from (I'm West London) and what else should I ask them to check?
Also, if they ask "what type of driving" I do - what do they alter on the car to change it? I want the car to feel safe and sure but what other options are there? What does all this camber / toe-in / blah blah do to the feel of the car?
Thanks
If you are using the car for average day to day driving, then leave it standard; the settings from Porsche are for tyre life, driveability and such - and use at autobahn speeds out of the box. Focussing the car in one particular area will remove focus in another IMHO.
Full inspection and adjustment on a 996 Turbo should take just over two hours. The car will need to be full of fuel/tools etc but unladen to set up to the official figures. It has been known for the camber adjustment bolts to seize in the lower arms which can scupper the alignment and mean replacement arms / bolts - but rare.
OPC Swindon can do the neccessary work, collection and delivery shouldn't be a problem - give Rob in service a call 01793 615888 or e-mail him for details
rob.clarke@porscheswindon.co.uk
Regards
Jon
Full inspection and adjustment on a 996 Turbo should take just over two hours. The car will need to be full of fuel/tools etc but unladen to set up to the official figures. It has been known for the camber adjustment bolts to seize in the lower arms which can scupper the alignment and mean replacement arms / bolts - but rare.
OPC Swindon can do the neccessary work, collection and delivery shouldn't be a problem - give Rob in service a call 01793 615888 or e-mail him for details
rob.clarke@porscheswindon.co.uk
Regards
Jon
Edited by Pope on Tuesday 20th November 12:12
Gassing Station | Porsche General | Top of Page | What's New | My Stuff


