Fitting Sports Exhaust - near Bedford
Fitting Sports Exhaust - near Bedford
Author
Discussion

Chauch

Original Poster:

520 posts

243 months

Tuesday 20th November 2007
quotequote all
I have found my Sports Exhaust and ideally would like to get it fitted at the weekend. Is this a specialist only job, home DIY (if so what tools needed) or any decent exhaust place?

Ideally Bedford, Northampton, Milton Keynes area....

richardb.jones

326 posts

256 months

Tuesday 20th November 2007
quotequote all
It's a DIY if you can get the car high off the ground (big axle stands ok if you don't mind being on your back for a while..) - you'll need some new parts as well as the exhausts - namely, 2 x new tailpipe clamps, new manifold to exhaust bolts and possibly a new bracket per side (depends on the state of the old one, clamps will be rusted so just cut them off). It's all very cramped under there so make sure you have all the correct sized sockets, stumpy ratchets etc.

Not recommended as a DIY if your abilities have only stretched to changing light bulbs or car battery etc(no offence intended to anybody...)

PS - if you do the proper wiring for the valves, then add another 3-4 hours at least .. frown


Edited by richardb.jones on Tuesday 20th November 12:41

Chauch

Original Poster:

520 posts

243 months

Tuesday 20th November 2007
quotequote all
Richard, thank you for the quick reply and I am of the battery and brake change level so probably best left to someone that knows what they are doing then!!

I have gone for the Agency Power system so no electronic bits to deal with. I guess I will need the clamps etc for this as well? It uses the existing hangers etc..

richardb.jones

326 posts

256 months

Tuesday 20th November 2007
quotequote all
Chauch said:
Richard, thank you for the quick reply and I am of the battery and brake change level so probably best left to someone that knows what they are doing then!!

I have gone for the Agency Power system so no electronic bits to deal with. I guess I will need the clamps etc for this as well? It uses the existing hangers etc..
The tailpipe clamps will have rusted solid - no point in even trying to free them so just get new ones from an OPC. Hangers are hit and miss - depending on the age, the nuts that fix onto the hanger may have also rusted solid - meaning you'll sheer the bolt off .. mad meaning new hangers (bolt is welded to the hanger) - or as I did rebolt the hanger. I'd suggest buying them anyway - and if you don't use them than take them back .. wink Better to be prepared.. Any specialist will have these parts in stock I would imagine - it's all standard stuff.

nickb55

276 posts

240 months

Tuesday 20th November 2007
quotequote all
for basic stuff i use a porsche specialist in Bedford, Auto 2000 45 quid an hour. 01234-210012

Chauch

Original Poster:

520 posts

243 months

Tuesday 20th November 2007
quotequote all
Thanks Nick - sounds like it is out on my ability and a specialist is needed. Just called Danny thanks, sounds perfect thumbup

nickb55

276 posts

240 months

Wednesday 21st November 2007
quotequote all
hi, you're welcome. THey have my 968CS at the moment. Used to be run by a guy calld charles marsland (he's the 3.2 reg guy at pcgb), and they did a lot of work on a 3.2 i had at the time. But then he moved away, and the 2 that worked for him run it now, Nick and Danny.

glad to help, cheers



lanan

814 posts

259 months

Wednesday 21st November 2007
quotequote all
Would agree that Auto2000 are a decent bunch and very helpful now that Charles has left..!