please recommend me a glue...
Discussion
I used that stuff with the mesh too.
Its an adhesive with a piece of mesh gause impregnated with the activator. Cut the mesh to the size of the mirror base, then cover with the adhesive and stick.
It didnt take long to set and while I think it needed 24 hours or so to cure, it was solid (stronger than the original porsche glue imo) and didnt fall off again.
Its an adhesive with a piece of mesh gause impregnated with the activator. Cut the mesh to the size of the mirror base, then cover with the adhesive and stick.
It didnt take long to set and while I think it needed 24 hours or so to cure, it was solid (stronger than the original porsche glue imo) and didnt fall off again.
Go into a Ford dealer (parts) mirror pads are about 50p. Don't get the Halfords pads as they are expensive and too thick and make the mirror wobble! It's the Sun (no not the newspaper)that weakens the glue so paint or cover the outside of the screen with a black square over the mirror pad.
I agree with Graham.
'Cos the Fiat screen in the Libra has no black area to glue to I tried every conceivable method and all weren't really satisfactory until I stuck a square of black vinyl from our local signwriters on the outside of the screen. Stuck mirror on with glass-bond... been there for two years.
'Cos the Fiat screen in the Libra has no black area to glue to I tried every conceivable method and all weren't really satisfactory until I stuck a square of black vinyl from our local signwriters on the outside of the screen. Stuck mirror on with glass-bond... been there for two years.
JakeR said:
Chaps,
I wonder if you could recommend me a glue? My rear view mirror has come unstuck from my windscreen and I would like to re-stick it! Thanks
JakeR
Is it a ford mirror (attaches directly to screen) or one that has 'boss', or bracket (mirror assy will slide on to this)??I wonder if you could recommend me a glue? My rear view mirror has come unstuck from my windscreen and I would like to re-stick it! Thanks
JakeR
Edited by Glassman on Tuesday 27th November 21:51
Ferg said:
I agree with Graham.
'Cos the Fiat screen in the Libra has no black area to glue to I tried every conceivable method and all weren't really satisfactory until I stuck a square of black vinyl from our local signwriters on the outside of the screen. Stuck mirror on with glass-bond... been there for two years.
I didn't black out the area on my Libra and the Loctite kit worked great...'Cos the Fiat screen in the Libra has no black area to glue to I tried every conceivable method and all weren't really satisfactory until I stuck a square of black vinyl from our local signwriters on the outside of the screen. Stuck mirror on with glass-bond... been there for two years.
B@man" Target="_blank">class="forumQuoter">B@man said:
I'd agree with Andy,
Sikaflex appears to stick just about anything - permanently !
Its beautifull isnt it.Sikaflex appears to stick just about anything - permanently !
- I know someone who used it as a hinge for a number of years.
- Bonded two sheets of 6mm ply end on end with a fillet of it.
Daniel
Gassing Station | Kit Cars | Top of Page | What's New | My Stuff





